Part Description: 2008 Chevrolet Trailblazer Camshaft Position Sensor
Vehicle Fitment
2008 Chevrolet Trailblazer | All Trims | 6 Cyl 4.2L
FAQ for Camshaft Position Sensor Repair
Q: How to install the Camshaft Position Sensor?
A:
First, you should reconnect the camshaft sensor and the jumper harness. Next, you should install the O-ring, the camshaft position sensor assembly, and the generator assembly.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Camshaft Position Sensor?
A:
You should disconnect the camshaft position sensor jumper harness and the engine harness electrical connectors. In addition, you should remove the generator bracket assembly and the camshaft sensor assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the camshaft position sensor mounting bolts?
A:
The recommended torque is 25 N.m (18 LB-FT).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the Engine Oil Pressure Sensor and/or Switch?
A:
You should disconnect the Oil Pressure Sensor electrical connector. In addition, you should remove the intake manifold and the oil pressure sensor.
Q: What is the recommended torque for the Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Nut?
A:
The recommended torque is 10 N.m (89 LB IN).
Q: What should you do if the engine coolant temperature is not warm enough?
A:
You should idle the engine until the engine coolant temperature reaches the correct temperature.