< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Trailblazer Rear Body Control Module Assembly
PartNumber: 25846782
Product Specifications- Notes: Short Wheel Base
- Other Names: Control Module
- Item Dimensions: 7.8 x 7.3 x 3.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15204779, 15253719, 15071153, 15092007, 15135616, 15180030, 10381268, 15198246, 15852162, 15869971, 15852165
- Part Description: 2008 Chevrolet Trailblazer Rear Body Control Module Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$116.59 MSRP:$242.12You Save: $125.53 (52%)
Dorman® Body Control Module for 2008 Chevrolet Trailblazer
PartNumber: 502-006Product Specifications- Notes: w/Remote Entry; Liftgate Module; Stamped 25846782; w/RPO Code AU0 (Remote Entry)
- Connector/Terminal Configuration: Pin
- Housing Height: 2.75"
- Housing Length: 8.5"
- Housing Material: Plastic
- Housing Width: 8.25"
- OE Part Number: 25846782
- UPC: 019495739494
- Part Description: 2008 Chevrolet Trailblazer Body Control Module
Vehicle Fitment- 2008 Chevrolet Trailblazer | All Trims | All Engines
$69.85
FAQ for Body Control Module Repair
Q: How to install the Communication Interface Module (TrailBlazer, Envoy)?
A:
First, you should install the module to the upper bracket and connect the electrical connectors. Next, you should install the protective cover to the module, position the right rear seat bottom to a passenger position, and reconfigure the OnStar(R) system.
By Bob
GM Specialist
01/11/2022Q: How to remove the Body Control Module?
A:
First, you should disconnect the negative battery cable. Then you should remove the left second-row seat and the rear electrical center cover. In addition, you should disconnect the body wiring extension and the electrical connector. Finally, the BCM should be removed.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts that retain the module to the liftgate?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the module thumb screw?
A:
The recommended torque is 0.2 N.m (2 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be noted during the removal of the Communication Interface Module?
A:
The vehicle communication interface module (VCIM) has a specific set of unique numbers that tie the module to each vehicle. Because these numbers are tied to the vehicle identification number of the vehicle, you must never exchange these parts with those of another vehicle.
By Bob
GM Specialist
01/11/2022Q: What should be noted when removing the Body Control Module Body Wiring Harness Extension Harness?
A:
You should be careful not to touch the exposed electrical contacts of the body wiring extension.
By Bob
GM Specialist
01/11/2022Q: How to install the Liftgate Control Module?
A:
You should install the module, the bolts that retain the module to the liftgate, and the liftgate trim panel. In addition, you should connect the electrical connectors.
By Bob
GM Specialist
01/11/2022Q: How to remove the Body Control Module Body Wiring Harness Extension Harness?
A:
First, you should disconnect the negative battery cable. Next, you should remove the left second-row seat and the rear electrical center cover. In addition, you should disengage the sliding latch retaining the BCM to the rear electrical center. Then, you should disconnect the body wiring extension and electrical connector. Finally, the body wiring extension should be removed from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Liftgate Control Module?
A:
You should disconnect the electrical connectors and remove the following parts: the liftgate trim panel, the bolts that retain the module to the liftgate, and the module.
By Bob
GM Specialist
01/11/2022Q: How to install the Body Control Module?
A:
First, you should install the BCM and connect the electrical connector. Next, you should install the rear electrical center cover and the left second-row seat. Finally, you should connect the negative battery cable.
By Bob
GM Specialist
01/11/2022See more FAQs (5)