< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Trailblazer AC Temperature Sensor
PartNumber: 25775833
Product Specifications- Notes: All Models
- Item Dimensions: 2.1 x 1.8 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10396844
- Part Description: 2008 Chevrolet Trailblazer AC Temperature Sensor
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$5.51 MSRP:$9.96You Save: $4.45 (45%)
OEM (Genuine) 2008 Chevrolet Trailblazer Sensor
PartNumber: 15865791
Product Specifications- Notes: 4.2 Liter, 2006-09; Envoy, Trailblazer; 4.2l
- Item Dimensions: 4.4 x 4.1 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12576410
- Part Description: 2008 Chevrolet Trailblazer Sensor
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT | 6 Cyl 4.2 L GAS
$77.66 MSRP:$146.54You Save: $68.88 (48%)
FAQ for Air Temperature Sensor Repair
Q: How to install the Mass Airflow Sensor/Intake Air Temperature Sensor?
A:
You should install the MAF/IAT sensor, the clamp securing the MAF/IAT sensor to the air cleaner housing, and the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the clamps at the MAF/IAT sensor and the throttle body?
A:
The recommended torque is 7 N.m (62 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Temperature Sensor-Lower Left Side?
A:
First, you should disconnect the electrical connector from the lower left air temperature sensor. Next, you should remove the I/P assembly and the lower left air temperature sensor.
By Bob
GM Specialist
01/11/2022Q: How to install the Ambient Air Temperature Sensor?
A:
First, you should position the Ambient Air Temperature Sensor to the panel assembly and connect the electrical connector to the sensor. Next, you should install the sensor and the front grille.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the clamp securing the MAF/IAT sensor to the air cleaner housing?
A:
The recommended torque is 7 N.m (62 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Ambient Air Temperature Sensor?
A:
You should remove the front grille and the Ambient Air Temperature Sensor. In addition, you should disconnect the electrical connector from the sensor.
By Bob
GM Specialist
01/11/2022Q: How to install the Air Temperature Sensor-Lower Right Side?
A:
First, you should connect the electrical connector to the lower right air temperature sensor. Next, you should install the lower right air temperature sensor and the I/P assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Temperature Sensor-Upper Left Side?
A:
You should remove the radio, the HVAC control module, and the air temperature sensor. Next, you should disconnect the electrical connector from the upper air temperature sensor.
By Bob
GM Specialist
01/11/2022Q: How to install the Air Temperature Sensor-Lower Left Side?
A:
First, you should connect the electrical connector to the lower left air temperature sensor. Next, you should install the lower left air temperature sensor and the I/P assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Temperature Sensor-Upper Right Side?
A:
You should remove the radio and disconnect the electrical connector from the upper right air temperature sensor. Next, you should remove the upper right air temperature sensor.
By Bob
GM Specialist
01/11/2022See more FAQs (9)