< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Trailblazer Evaporator Tube
PartNumber: 15923988
Product Specifications- Notes: 4.2 Liter, Short Wheelbase; 5.3 & 6.0 Liter, 2006-09
- Other Names: Evaporator Tube
- Item Dimensions: 33.6 x 21.4 x 7.8 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15125284, 15883408
- Part Description: 2008 Chevrolet Trailblazer Evaporator Tube
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$115.84 MSRP:$218.58You Save: $102.74 (48%)
OEM (Genuine) 2008 Chevrolet Trailblazer Hose & Tube Assembly
PartNumber: 15883021
Product Specifications- Other Names: AC Hose, Hose & Tube Assembly
- Item Dimensions: 34.0 x 19.3 x 11.5 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19432438
- Part Description: 2008 Chevrolet Trailblazer Hose & Tube Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, SS | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2008 Chevrolet Trailblazer Hose & Tube Assembly
PartNumber: 25841573
Product Specifications- Notes: 4.2 Liter, Short Wheelbase; Compressor & Condenser; 4.2l; 113" Wheelbase
- Other Names: AC Hose, Hose & Tube Assembly
- Item Dimensions: 35.3 x 6.6 x 31.8 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15185275, 25815112, 15884820
- Part Description: 2008 Chevrolet Trailblazer Hose & Tube Assembly
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
FAQ for A/C Hose Repair
Q: How to install the Suction Screen?
A:
You should measure the ID of the suction hose or manifold suction fitting and install the correct mandrel. In addition, you should lubricate the A/C suction screen and install the A/C compressor hose assembly to the A/C compressor.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the compressor hose nut?
A:
The recommended torque is 16 N.m (12 LB-FT).
By Bob
GM Specialist
28/10/2022Q: How to install the Compressor Hose Assembly (LH6, LS2)?
A:
First, you should install the compressor hose assembly and the compressor hose. Next, you should connect the electrical connector to the A/C low-pressure switch and install the washer bottle. Then you should evacuate and recharge the A/C system. Finally, you should test the fittings of the component for leaks.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the nuts retaining the auxiliary evaporator tube to the auxiliary piping?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the nuts retaining the evaporator tube to the fender?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the nuts retaining the evaporator tube to the condenser?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the nut to accumulator
A:
The recommended torque is 16 N.m (12 LB-FT).
By Bob
GM Specialist
28/10/2022Q: How to remove the Suction Screen?
A:
You should remove the A/C compressor hose assembly, pry upward on the band and move the tool around the diameter of the screen. Next, you should remove the screen.
By Bob
GM Specialist
28/10/2022Q: How to install the Evaporator Tube?
A:
First, you should install the new O-ring seal and the evaporator tube. Next, you should connect the evaporator tube and the auxiliary evaporator tube. In addition, you should install the coolant recovery tank and the washer solvent container. Then, you should evacuate and recharge the A/C system.
By Bob
GM Specialist
28/10/2022See more FAQs (4)