< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Impala
< Back to View All
Lift Supports
- Department
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Impala Strut
PartNumber: 25964300
Product Specifications- Notes: W/O Spoiler
- Location: Driver Side; Passenger Side
- Other Names: Lift Cylinder, Strut
- Item Dimensions: 14.1 x 1.4 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15284658
- Part Description: 2008 Chevrolet Impala Strut
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$23.06 MSRP:$36.27You Save: $13.21 (37%)
StrongArm® Trunk Lid Lift Support for 2008 Chevrolet Impala
PartNumber: 6255Product Specifications- Notes: with Spoiler
- Body: 18.00
- BODY CONNECTION: ball socket (nylon) 8mm
- Brackets: No
- Compressed Length: 8.31
- Extended Length: 12.31
- Force: 90.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 8.00
- SHAFT CONNECTION: ball socket (nylon) 10mm
- Stroke: 4.00
- UPC: 845998015359
- Part Description: 2008 Chevrolet Impala Trunk Lid Lift Support
Vehicle Fitment- 2008 Chevrolet Impala | All Trims | All Engines
$16.08OEM (Genuine) 2008 Chevrolet Impala Strut
PartNumber: 25964299
Product Specifications- Notes: W/Spoiler
- Location: Driver Side; Passenger Side
- Other Names: Lift Cylinder, Strut
- Item Dimensions: 14.7 x 1.3 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15284657
- Part Description: 2008 Chevrolet Impala Strut
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$24.06 MSRP:$36.31You Save: $12.25 (34%)
StrongArm® Trunk Lid Lift Support for 2008 Chevrolet Impala
PartNumber: 4071Product Specifications- Notes: without Spoiler
- Body: 19.00
- BODY CONNECTION: ball socket (nylon) 8mm
- Brackets: No
- Compressed Length: 8.55
- Extended Length: 12.55
- Force: 74.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 8.00
- SHAFT CONNECTION: ball socket (nylon) 10mm
- Stroke: 4.00
- UPC: 845998003998
- Part Description: 2008 Chevrolet Impala Trunk Lid Lift Support
Vehicle Fitment- 2008 Chevrolet Impala | All Trims | All Engines
$14.04
FAQ for Trunk Lid Lift Support Repair
Q: What's the tip for replacing the rear compartment lid strut?
A:
You can remove the metal clip at the ends of the strut rod, then pull away from the stud.
By Bob
GM Specialist
02/11/2022Q: What should you be careful about when replacing the rear compartment lid strut?
A:
You must not apply pressure to the middle of the rod because damage or bending will result. You can apply pressure only at the end of the rod that you are removing or attaching.
By Bob
GM Specialist
02/11/2022