Part Description: 2008 Chevrolet Impala Timing Chain
More Info
Vehicle Fitment
2008 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$64.84MSRP: $107.33
You Save: $42.49 (40%)
FAQ for Timing Chain Repair
Q: What's the recommended torque for the timing chain tensioner bolts?
A:
The recommended torque is 21 N.m (15 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What tools are needed to replace the timing chain and sprocket?
A:
You will need EN-47719 Tensioner Compressor.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the mounting bolts?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What's the installation procedure for the drive belt idler pulley?
A:
The installation procedure is to install the required drive belt Idler Pulley, tighten the required drive belt idler pulley bolt to 50 N.m (37 lb-ft) then install the drive belt.
Q: What's the removal procedure for the drive belt tensioner?
A:
The removal procedure is to remove the drive belt, the drive Belt Tensioner bolt, and the drive belt tensioner.
Q: What's the removal procedure for the camshaft rear bearing hole plug?
A:
The removal procedure is to remove the engine flywheel, and the Camshaft rear bearing hole plug.