Part Description: 2008 Chevrolet Impala Bracket Bolt
More Info
Vehicle Fitment
2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2008 Chevrolet Impala Coolant Recovery Reservoir Overflow Hose
More Info
Vehicle Fitment
2008 Chevrolet Impala | SS | 8 Cyl 5.3 L GAS
FAQ for Radiator Hose Repair
Q: How many lower fir tree fasteners attaching the seat back insert need to be removed?
A:
2lower fir tree fasteners attaching the seat back insert need to be removed.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the hinge bolts and nuts?
A:
The recommended torque is 24 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How many fir tree fasteners which retain the bladder to the seat back need to be removed?
A:
2fir tree fasteners that retain the bladder to the seat back need to be removed.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the bolts that secure the adjuster to the seat?
A:
The recommended torque is 24 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the water pump?
A:
You will need to drain the cooling system, loosen the Water Pump pulley bolts, remove the drive belt, remove the water pump pulley bolts and pulley, remove the water pump bolts and the water pump and gasket, then clean the water pump mating surfaces.
Q: What's the removal procedure for the engine coolant thermostat housing?
A:
The removal procedure is to drain the cooling system, remove the air cleaner outlet duct, reposition the radiator outlet hose clamp at the Thermostat Housing, remove the radiator outlet hose from the thermostat housing, remove the thermostat housing bolt/stud and the thermostat housing and gasket and clean the gasket surfaces.
Q: What's the recommended torque for the weatherstrip retainer screws?