< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Impala
< Back to View All
Warning Lights, Interior Lights & Other Lights
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Impala Trunk Lamp
PartNumber: 10273135
Product Specifications- Other Names: Compartment Lamp, Trunk Lamp
- Item Dimensions: 2.7 x 1.5 x 1.4 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Impala Trunk Lamp
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$24.06 MSRP:$36.30You Save: $12.24 (34%)
OEM (Genuine) 2008 Chevrolet Impala Housing, Dome & Reading Lamp
PartNumber: 15032587
Product Specifications- Notes: W/O Sunroof; W/Sunroof
- Other Names: Dome Lamp, Housing, Lamp Housing
- Item Dimensions: 8.1 x 4.7 x 2.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Impala Housing, Dome & Reading Lamp
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$14.82 MSRP:$22.34You Save: $7.52 (34%)
OEM (Genuine) 2008 Chevrolet Impala Dome Lamp Assembly
PartNumber: 20998906
Product Specifications- Notes: W/O Sunroof, Ebony, Titanium; W/Sunroof, Ebony, Titanium
- Other Names: Dome Lamp Assembly
- Item Dimensions: 8.8 x 5.1 x 3.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89026620
- Part Description: 2008 Chevrolet Impala Dome Lamp Assembly
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2008 Chevrolet Impala Lamp Asm-Dome & Reading *Neutral L
PartNumber: 20998907
Product Specifications- Notes: W/O Sunroof, Neutral; W/Sunroof, Neutral
- Other Names: Dome Lamp Assembly
- Item Dimensions: 8.3 x 3.6 x 1.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89026903
- Part Description: 2008 Chevrolet Impala Lamp Asm-Dome & Reading *Neutral L
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Interior Lights Repair
Q: What's the removal procedure for the rear compartment courtesy lamp?
A:
The removal procedure is to open the rear compartment, remove the rear compartment lamp using a small flat-bladed tool to release the retaining tabs, then remove the bulb from the rear compartment lamp socket.
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the sunshade-illuminated mirror lamp bulb?
A:
The removal procedure is to lower the sunshade and open the illuminated mirror door, insert a small flat-bladed tool at the outer edge of the lamp lens in the slot, carefully press down to remove the lens, then remove the bulb.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the instrument panel courtesy lamp bulb?
A:
You will need to remove the instrumental panel (I/P) insulator panel.
By Bob
GM Specialist
01/11/2022Q: What's the tip for replacing the courtesy lamp and instrumental panel?
A:
You can disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the rear compartment courtesy lamp?
A:
The installation procedure is to install the bulb to the rear compartment lamp socket, install the rear compartment lamp, press it into place until fully seated then close the rear compartment.
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the rear compartment lid lamp lens and bulb (Impala RPO T53)?
A:
The removal procedure is to open the rear compartment, remove the lens from the rear compartment lid lamp, inserted a small coin under the rear compartment lid lamp lens and then twist the coin, then remove the bulb from the rear compartment lid lamp socket.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the sunshade illuminated mirror lamp bulb?
A:
The installation procedure is to install the bulb and align the upper lens tab to the opening. Insert the upper edge of the lens, insert a small flat-bladed tool at the outer edge of the lamp lens and carefully press up to install the lens, close the illuminated mirror door and raise the sunshade.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the rear compartment lid lamp lens and bulb (Impala RPO T53)?
A:
The installation procedure is to install the bulb to the rear compartment lid lamp socket, install the lens to the rear compartment lid lamp, press it into place until fully seated then close the rear compartment.
By Bob
GM Specialist
01/11/2022See more FAQs (3)