Notes: Impala, Monte Carlo;Impala, Monte Carlo; Low Beam
Location: Driver Side; Passenger Side
Item Dimensions: 4.1 x 2.2 x 2.2 inches
Item Weight: 0.70 Pounds
Fitment Type: Direct Replacement
Replaced by: 13503417
Part Description: 2008 Chevrolet Impala High Beam Bulb
More Info
Vehicle Fitment
2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2008 Chevrolet Impala Run Lamp Bulb
More Info
Vehicle Fitment
2008 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
Part Description: 2008 Chevrolet Impala Run Lamp Bulb
More Info
Vehicle Fitment
2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2008 Chevrolet Impala Headlamp Bulb
More Info
Vehicle Fitment
2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Notes: Discontinued; 12V; 65W; Halogen; Single - Boxed; Off-Road Use Only
UPC: 760687147145
Part Description: 2008 Chevrolet Impala Headlight Bulb
More Info
Vehicle Fitment
2008 Chevrolet Impala | All Trims | All Engines
FAQ for Headlight Bulbs Repair
Q: What's the tip for replacing the headlamp bulb accessory cover?
A:
You may turn the cover counterclockwise to remove it.
By Bob
GM Specialist
01/11/2022
Q: What's the tip for replacing the front part and turn signal bulb?
A:
You may pull the park and turn the signal lamp bulb straight from the bulb socket.
By Bob
GM Specialist
01/11/2022
Q: What's the preliminary procedure for replacing the headlamp bulb?
A:
The procedure is to open the hood and remove either the LH or RH headlamp assembly.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be done before replacing the front fog lamp bulb?
A:
You will need to remove either the LF or RF headlamp assembly and disconnect the fog lamp electrical connector.
Q: How to remove the park brake warning lamp switch?
A:
You will need to remove the left-side instrument panel insulator, the left-side door sill plate, the park brake indicator switch electrical connector, the park brake indicator switch screw, and the parking brake indicator switch.
Q: What's the tip for replacing the rear park lamp bulb?
A:
You can turn the lamp socket counterclockwise to remove it.