Part Description: 2008 Chevrolet Impala Fuel Tank Fuel Pump Module Kit (W/O Fuel Level Sensor)
More Info
Vehicle Fitment
2008 Chevrolet Impala | SS | 8 Cyl 5.3 L GAS
FAQ for Fuel Sending Unit Repair
Q: Can I reuse the lock rings?
A:
No, you cannot. These lock rings may be reused if they are not damaged or warped.
By Bob
GM Specialist
01/11/2022
Q: Can I use impact tools?
A:
No, you cannot. Significant impact tools will be required to release the lock ring. The use of a hammer and screwdriver is not recommended. Secure the fuel tank to prevent fuel tank rotation.
By Bob
GM Specialist
01/11/2022
Q: Why shouldn't I handle the fuel sender assembly by the fuel pipes?
A:
The amount of leverage generated by handling the fuel pipes could damage the joints.
By Bob
GM Specialist
01/11/2022
Q: Can I handle the fuel sender assembly by the fuel pipes?
A:
No, you cannot. The amount of leverage generated by handling the fuel pipes could damage the joints.
By Bob
GM Specialist
01/11/2022
Q: What should be done when installing the fuel sender assembly?
A:
You will need to always replace the fuel sender seal when installing the fuel sender assembly. You can replace the lock ring if necessary but you cannot apply any type of lubrication in the seal groove.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What will happen if the fuel injectors are found to be leaking?
A:
If the Fuel Injectors are found to be leaking, the engine oil may be contaminated with fuel.
Q: What's the installation procedure for the fuel level sensor?
A:
The installation procedure is to push in the electrical terminals and ensure the terminals are secure, carefully insert the level sensor until the locking tabs snap into the locking position, and install the fuel pump module.
Q: What should be noticed when using compressed air?
A:
You will need to wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.