< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Impala
< Back to View All
Cigarette Lighters
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Impala Lighter Housing
PartNumber: 25774623
Product Specifications- Notes: W/O Police; Center Seat
- Item Dimensions: 2.8 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999477, 12450044, 01999477
- Part Description: 2008 Chevrolet Impala Lighter Housing
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, Base, Eco, LS, LS Sport, LT, LTZ, Police, Premier, SS | 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$6.85 MSRP:$10.32You Save: $3.47 (34%)
FAQ for Cigarette Lighters Repair
Q: What's the proper way to install the auxiliary power outlet?
A:
The proper way is to route the connector through the retainer and align the accessory power receptacle retainer to the slot in the opening, install the retainer by pressing it into place fully seated, connect the electrical connector to the receptacle, align the tabs on the receptacle to the slots in the retainer, install the accessory power receptacle by pressing into place until fully seated, then install the accessory power receptacle fuse.
By Bob
GM Specialist
29/10/2022Q: What should be done if J 42059 tool fails to release the lighter socket from the retainer?
A:
You will need to insert a small grinding tool with a cutoff wheel into the socket, remove the plastic latches in the 3 mm (0.11 in) square windows and use the J 42059 as directed above to remove the socket.
By Bob
GM Specialist
29/10/2022Q: What's the proper way to install the cigar lighter receptacle or 12-volt accessory power receptacle?
A:
The proper way is to route the connector through the retainer, align the accessory power receptacle retainer to the slot in the opening, install the retainer by pressing it into place fully seated, connect the electrical connector to the receptacle, align the tabs on the receptacle to the slots in the retainer, install the accessory power receptacle by pressing into place until fully seated, then install the accessory power receptacle fuse.
By Bob
GM Specialist
29/10/2022