< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Impala
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Impala Front Sensor
PartNumber: 15250331
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Impala Front Sensor
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$238.31 MSRP:$359.52You Save: $121.21 (34%)
OEM (Genuine) 2008 Chevrolet Impala Side Sensor
PartNumber: 10346367
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.3 x 2.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Impala Side Sensor
Vehicle Fitment- 2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$178.10 MSRP:$280.11You Save: $102.01 (37%)
FAQ for Air Bag Sensor Repair
Q: What's the recommended torque for the Inflatable Restraint Roof Side Rail Bolt?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the preliminary procedure for replacing the Impala inflatable restraint roof side rail module?
A:
The procedure is to disable the SIR system, remove the windshield pillar garnish molding, the center pillar trim, the rear quarter upper trim panel, and the assist handles, then lower the side of the headliner.
By Bob
GM Specialist
01/11/2022Q: What's the preliminary procedure for replacing the Impala inflatable restraint side impact sensor?
A:
You can disable the SIR system, and remove the front door panel.
By Bob
GM Specialist
01/11/2022Q: What's the preliminary procedure for replacing the inflatable restraint front-end sensor?
A:
You can disable the SIR system, remove the upper air baffle and deflector, both headlamps, and the 8 fascia grille support bolts, remove the 4 retainers from the fascia to grille support, then pull the grille support forward to gain clearance to the sensors.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the inflatable restraint side impact sensor assembly bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the inflatable front-end sensor mounting bolts?
A:
The recommended torque is 11 N.m (97 lb in).
By Bob
GM Specialist
01/11/2022Q: How many inflatable restraint side impact sensor assembly bolts are needed?
A:
2inflatable restraint side impact sensor assembly bolts attach.
By Bob
GM Specialist
01/11/2022Q: What shouldn't be done before applying power to the inflatable restraint side impact sensor?
A:
You are not supposed to strike or jolt the inflatable restraint side impact sensor (SIS). You should make sure it is securely fastened before applying power to it.
By Bob
GM Specialist
01/11/2022Q: How many inflatable front-end sensor mounting bolts are needed when installing the inflatable restraint front-end sensor?
A:
2inflatable front-end sensor mounting bolts attach.
By Bob
GM Specialist
01/11/2022Q: What's the disabling procedure for the negative battery cable?
A:
The procedure is to turn the steering wheel so that the vehicle's wheels are pointing straight ahead, place the ignition in the OFF position, disconnect the negative battery cable from the battery, and wait 1 minute before working on the system.
By Bob
GM Specialist
28/10/2022See more FAQs (6)