< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Corvette
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Corvette Pad, Driver Seat Cushion
PartNumber: 19330709
Product Specifications- Notes: W/O Heat, 2005-11; W/Heat; W/O Heat, 2005-10
- Other Names: Seat Cushion Pad
- Item Dimensions: 27.8 x 22.8 x 8.8 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88898540
- Part Description: 2008 Chevrolet Corvette Pad, Driver Seat Cushion
Vehicle Fitment- 2008 Chevrolet Corvette | 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Seat Cushion Pad Repair
Q: What should be done before servicing the front seat back cushion cover and cushion pad?
A:
You should remove the seat and the seat back insert.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seat cushion frame?
A:
The procedure is to remove the seat, the pre-tensioner and seat belt buckle, the side trim panel, the seat cushion cover and pad, the inflatable restraint passenger presence system, the lumbar pump and module and pull them up, the memory seat module, the forward pins, the hinge bolts, the seat back, the seat cushion frame, the recliner mechanism, and the wire assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the front seat back frame?
A:
You should install the seat back frame to the lower seat assembly, the hinge bolts and nuts, the seat belt buckle pretensioner, the seat back cushion cover and pad, and the seat assembly.
By Bob
GM Specialist
01/11/2022Q: What should be noted for the seat cushion cover assembly?
A:
You should remove the hog rings attaching the cover to the frame and then untie the drawstring releasing the cover from the frame.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the front seat back cushion latch release cable?
A:
The procedure is to install the release cables to the right and left hinges, the nuts to the right and left hinge bolts, the free play retention cable, and the seat back trim cover and pad.
By Bob
GM Specialist
01/11/2022Q: How many knobs attach to the lumbar switch?
A:
There are 2 knobs attaching the lumbar switch.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the seat cushion frame?
A:
The procedure is to install the springs and wires, the recliner mechanism, the seat adjuster, the seat back, the actuator, the hinge bolt nuts, the pins, the seat module, the lumbar pump and module, the memory module, the trim cover and pad, the side trim panel, the inflatable restraint passenger presence system, the seat cushion cover and pad, the pretensioner and seat belt buckle and the seat.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power seat switch bracket screw?
A:
The recommended torque is 3 N.m (27 lb in).
By Bob
GM Specialist
01/11/2022Q: How many retainers attach the seat back trim to the frame retainer?
A:
There are 8 retainers attaching the seat back trim to the frame retainer.
By Bob
GM Specialist
01/11/2022Q: How to remove the front seat back frame?
A:
You can remove the seat assembly, the seat back cushion cover and pad, the hook and loop at the end of the seat cushion cover, the seat belt buckle pretensioner, the hinge nuts and bolts, and the seat back frame.
By Bob
GM Specialist
01/11/2022See more FAQs (11)