< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Corvette
< Back to View All
Power Steering Pumps
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Corvette Reservoir
PartNumber: 26046502
Product Specifications- Notes: W/O Zr1
- Other Names: Reservoir
- Item Dimensions: 6.8 x 6.4 x 6.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Corvette Reservoir
Vehicle Fitment- 2008 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$58.79 MSRP:$97.30You Save: $38.51 (40%)
FAQ for Power Steering Reservoir Repair
Q: What should be noted for the power steering fluid?
A:
When adding fluid or making a complete fluid change, you should always use the proper power steering fluid. Failure to use the proper fluid will cause hose and seal damage and fluid leaks.
By Bob
GM Specialist
02/11/2022Q: What is the installation procedure for the remote power steering fluid reservoir bracket?
A:
The procedure is to install the power steering fluid reservoir bracket, the bolts to the power steering fluid reservoir bracket, and the power steering fluid reservoir.
By Bob
GM Specialist
01/11/2022Q: What is the service procedure for the power steering system?
A:
You should fill the pump reservoir with fluid to the minimum system level, fully charge the hydro-boost accumulator, raise the vehicle until the front wheels are off the ground, verify the power steering fluid level per operating specification, start the engine and then verify the fluid level.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the remote power steering fluid reservoir bracket?
A:
The procedure is to remove the power steering fluid reservoir, the bolts from the power steering fluid reservoir bracket, and the power steering fluid reservoir bracket.
By Bob
GM Specialist
01/11/2022Q: How to remove the remote power steering fluid reservoir?
A:
You can place a drain pan under the vehicle, remove the cap stick from the power steering fluid reservoir, remove the power steering fluid reservoir, remove the power steering reservoir outlet pipe/hose and then remove the power steering return hose.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts to the power steering fluid reservoir bracket?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the remote power steering fluid reservoir?
A:
You can install the power steering fluid reservoir, the power steering reservoir outlet pipe/hose, the power steering return hose, and the power steering fluid reservoir.
By Bob
GM Specialist
01/11/2022See more FAQs (2)