Part Description: 2008 Chevrolet Corvette Suction Pipe
More Info
Vehicle Fitment
2008 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Oil Dipstick Tube Repair
Q: What is the removal procedure for the oil level indicator and tube?
A:
The procedure is to remove the oil level indicator, the oil level indicator tube bolt, the oil level indicator tube, and the O-ring from the oil level indicator tube.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the oil level indicator and tube?
A:
The procedure is to install the oil level indicator tube into position, the oil level indicator tube bolt, and the oil level indicator.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the oil level indicator tube bolt?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the engine oil and oil filter?
A:
The procedure is to install the Oil Filter to the engine block and the oil fill cap.
Q: What is the removal procedure for the oil pan cover?
A:
The procedure is to remove the Oil Pan cover retaining bolts, the cover, and the gasket.
Q: What should be noted for the fluid drain plan plug?
A:
You should clean the surrounding area around the fluid drain plug and check the transmission fluid level.