You can install the MAF/IAT sensor and the 2 screws in the air cleaner housing and then connect the MAF/IAT sensor electrical connector.
By Bob
GM Specialist
01/11/2022
Q: How to remove the mass airflow sensor?
A:
You can disconnect the mass air flow (MAF)/air intake temperature (IAT) sensor electrical connector and then remove the 2 screws and the MAF/IAT sensor from the air cleaner housing.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the throttle body assembly?
A:
The procedure is to install a new Throttle Body gasket, the throttle body assembly, the 4 throttle body bolts, and the air cleaner assembly.
Q: How to remove the air cleaner element?
A:
You can remove the air cleaner assembly, the bolts holding the Air Filter retainer to the air cleaner assembly, and the air filter.
Q: How to install the manifold absolute pressure sensor?
A:
You can reconnect the MAP Sensor electrical connector to the engine wiring harness, install the MAP sensor, install the engine sight shield and then install the oil filler cap.