< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Corvette
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Corvette Intake Manifold
PartNumber: 12663489
Product Specifications- Notes: Corvette; 7.0l
- Other Names: Intake Manifold
- Item Dimensions: 9.3 x 26.3 x 16.2 inches
- Item Weight: 10.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12569011
- Part Description: 2008 Chevrolet Corvette Intake Manifold
Vehicle Fitment- 2008 Chevrolet Corvette | 427, 427 Limited Edition Z06, Z06, Z06 Carbon | 8 Cyl 7.0 L GAS
$312.66 MSRP:$517.38You Save: $204.72 (40%)
OEM (Genuine) 2008 Chevrolet Corvette MANIFOLD-INT
PartNumber: 12686561
Product Specifications- Notes: Corvette; 6.2l
- Other Names: Intake Manifold
- Item Dimensions: 25.9 x 14.8 x 11.3 inches
- Item Weight: 10.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12602477
- Part Description: 2008 Chevrolet Corvette MANIFOLD-INT
Vehicle Fitment- 2008 Chevrolet Corvette | Base, Grand Sport, ZR1 | 8 Cyl 6.2 L GAS
$459.26 MSRP:$799.33You Save: $340.07 (43%)
FAQ for Intake Manifold Repair
Q: How to remove the intake manifold?
A:
You can remove the engine sight covers, the vacuum hose from the brake booster, the manifold absolute pressure (MAP) sensor, the grommet, the evaporative emission (EVAP) clip, bolt, bracket, valve, and tubes, the intake manifold bolts and fuel rail stop bracket, the intake manifold and the intake manifold gaskets.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the upper intake manifold sight shield?
A:
The procedure is to install the left engine sight shield, the right engine sight shield, and the oil filler cap.
By Bob
GM Specialist
01/11/2022Q: How to remove the engine block valley cover?
A:
You can remove the intake manifold, the oil pressure switch, the engine valley retaining bolts, the engine valley cover, the engine valley gasket, and the O-rings.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the engine valley retaining bolts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the upper intake manifold sight shield?
A:
You can remove the oil filler cap, the oil filler cap, and the left engine sight shield.
By Bob
GM Specialist
01/11/2022Q: How to install the engine block valley cover?
A:
You can install the O-rings, the engine valley gasket, the engine valley cover, the retaining bolts, the intake manifold, and the oil pressure switch.
By Bob
GM Specialist
01/11/2022Q: How to install the intake manifold?
A:
You can install new intake manifold-to-cylinder head gaskets, the intake manifold, the fuel rail stop bracket, the intake manifold bolts, the MAP sensor and grommet, the EVAP valve, the EVAP tubes, the fuel rail, the vacuum hose, and the engine sight cover.
By Bob
GM Specialist
01/11/2022See more FAQs (2)