< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Corvette
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Dorman® Engine Heater Hose Assembly for 2008 Chevrolet Corvette
PartNumber: 626-592Product Specifications- Notes: Air Bleeder Pipe
- Height: 4.16 in
- Inside Diameter: 0.21 in
- Length: 8. in
- OE Part Number: 12602548
- Outside Diameter: 0.29 in
- Package Contents: 1 Heater Hose Assembly
- UPC: 885484879430
- Width: 0.8 in
- Part Description: 2008 Chevrolet Corvette Engine Heater Hose Assembly
Vehicle Fitment- 2008 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
- 2008 Chevrolet Corvette | All Trims | 8 Cyl 6.2L
$37.35
Gates® Safety Stripe Hvac Heater Hose for 2008 Chevrolet Corvette
PartNumber: 28409Product Specifications- Notes: Cut to Length, 17"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 10 mm
- End 2 Inside Diameter: .375 in
- Material: EPDM
- OE Part Number: 8899
- UPC: 072053081183
- Weight Per Length: 8.25 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 2008 Chevrolet Corvette Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2008 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
- 2008 Chevrolet Corvette | All Trims | 8 Cyl 6.2L
$44.06
Gates® Safety Stripe Hvac Heater Hose for 2008 Chevrolet Corvette
PartNumber: 28407Product Specifications- Notes: Cut to Length, 8"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.25"
- OE Part Number: 34580
- UPC: 072053133219
- Weight Per Length: 6 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 2008 Chevrolet Corvette Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2008 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
- 2008 Chevrolet Corvette | All Trims | 8 Cyl 6.2L
$31.48
Gates® Hvac Heater Molded Hose for 2008 Chevrolet Corvette
PartNumber: 18127Product Specifications- Centerline Length (in): 19.7"
- Inside Diameter 1 (in): 0.24"
- Inside Diameter 2 (in): 0.35"
- Number of Branches: 0
- UPC: 072053541298
- Part Description: 2008 Chevrolet Corvette Hvac Heater Molded Hose
Vehicle Fitment- 2008 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
- 2008 Chevrolet Corvette | All Trims | 8 Cyl 6.2L
$13.97
FAQ for Heater Hose Repair
Q: How to install the heater pipes?
A:
You can install the heater pipe assembly into position in the vehicle, the heater pipe assembly to the heater core, the heater pipe assembly retaining bolt, the heater hose clamps into position, and the rear evaporator line assembly.
By Bob
GM Specialist
01/11/2022Q: What special tool will I need when servicing the heater pipes?
A:
You will need spring hose clamp pliers.
By Bob
GM Specialist
01/11/2022Q: How to remove the heater inlet hose?
A:
You can drain the cooling system, disengage tension on the heater inlet hose clamp at the heater pipe assembly, disconnect the heater inlet hose from the heater pipe assembly, disconnect the heater inlet hose from the underhood junction box retainer clip, disengage tension on the heater inlet hose clamp at the water pump, disconnect the heater inlet hose from the water pump and then remove the heater inlet hose from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to install the heater inlet hose?
A:
You can install the heater inlet hose onto the vehicle, connect the heater inlet hose to the water pump, connect the heater inlet hose to the underhood junction box retainer clip and then disconnect the heater inlet hose to the heater pipe assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the heater pipes?
A:
You can recover the refrigerant from the air conditioning (A/C) system, remove the rear evaporator line assembly, release and reposition the heater inlet and outlet hose clamps using the J 38185, remove the heater pipe assembly to the heater core retaining bolt and then remove the heater pipe assembly from the vehicle.
By Bob
GM Specialist
01/11/2022