2008 Chevrolet Corvette | 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS
FAQ for Drive Belt Repair
Q: What should be noted when servicing the drive belt?
A:
You should not use belt dressing on the drive belt. Belt dressing causes the breakdown of the composition of the drive belt. Failure to follow this recommendation will damage the drive belt.
By Bob
GM Specialist
29/10/2022
Q: How to install the drive belt?
A:
You can install the appropriate tool to the drive belt tensioner, the accessory drive belt under the water pump pulley, the accessory drive belt onto the drive belt tensioner, and the air intake duct.
By Bob
GM Specialist
29/10/2022
Q: How to remove the drive belt?
A:
You can remove the air intake duct, the accessory drive belt from the pulleys and tensioner, and the breaker bar and socket from the drive belt tensioner bolt.
By Bob
GM Specialist
29/10/2022
Q: What is the installation procedure for the air conditioning compressor belt?
A:
The procedure is to install the A/C belt around the crankshaft balancer, the A/C belt over the idler pulley, the A/C belt around the A/C compressor pulley, and then install the accessory drive belt.
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the air conditioning compressor belt?
A:
The procedure is to remove the accessory drive belt, the air conditioning (A/C) belt from the pulleys, and the wrench and or socket from the A/C belt tensioner.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to remove the drive belt idler pulley?
A:
You can remove the accessory drive belt, loosen the drive belt Idler Pulley mounting bolt and then remove the drive belt idler pulley.
Q: What is the installation procedure for the timing chain?
A:
The procedure is to install the key into the crankshaft keyway, the crankshaft sprocket onto the front of the crankshaft, the sprocket onto the crankshaft, the Timing Chain tensioner and bolts, the automatic transmission flex plate or manual transmission flywheel and bolts and the oil pump.
Q: What is the removal procedure for the drive belt tensioner?
A:
The procedure is to remove the accessory drive belt, the accessory drive Belt Tensioner bolts, and the accessory drive belt tensioner.