Part Description: 2008 Chevrolet Corvette Latch Asm-Rear Compartment Lift Window
More Info
Vehicle Fitment
2008 Chevrolet Corvette | 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS
FAQ for Door Lock Repair
Q: What is the recommended torque for the front side door lock screw?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the door lock status indicator?
A:
The procedure is to disconnect the harness connector from the door lock indicator, route the wire harness and connect it to the door trim panel and then install the door lock indicator to the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the door lock status indicator?
A:
The procedure is to pry up at the base of the door lock indicator bezel, remove the door lock indicator and disconnect the harness connector.
By Bob
GM Specialist
01/11/2022
Q: How many screws attach to the front side door lock?
A:
There are 2 screws attaching the front side door.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How many bolts attach to the front side door hinge upper?
Q: How to install the door inside manual release actuator?
A:
You can engage the cable end, rotate the door release assembly forward, position the cable sheath, install the fasteners to the backside of the door release actuator, install both fasteners and then install both fastener trim plugs.
Q: What is the installation procedure for the door control module?
A:
The procedure is to install the window regulator to the door and then install the door trim panel.