2008 Chevrolet Corvette Brake Booster

The procedure is to disconnect the battery negative cable, remove the protective cap on the radiator surge tank upper stud, remove the radiator surge tank upper nut, loosen the radiator surge tank side nut, lift the radiator surge tank upward and position it forward, disconnect the electrical connector, remove the nuts securing the master cylinder, remove the master cylinder, and remove the instrument panel lower trim panel. And then you can remove the brake pedal position sensor, the retainer, the washer, the brake pedal pin, and brake booster pushrod, the brake booster mounting nuts and washers, and the brake booster and seal from the cowl.