< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Corvette
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Corvette Front Sensor
PartNumber: 10362555
Product Specifications- Notes: Base, 427 & Gs
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.5 x 3.1 x 3.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10302875
- Part Description: 2008 Chevrolet Corvette Front Sensor
Vehicle Fitment- 2008 Chevrolet Corvette | 427, Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$219.89 MSRP:$331.73You Save: $111.84 (34%)
OEM (Genuine) 2008 Chevrolet Corvette Side Sensor
PartNumber: 10362535
Product Specifications- Notes: Base, 427 & Gs
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.4 x 3.1 x 3.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10302876
- Part Description: 2008 Chevrolet Corvette Side Sensor
Vehicle Fitment- 2008 Chevrolet Corvette | 427, Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$207.90 MSRP:$313.65You Save: $105.75 (34%)OEM (Genuine) 2008 Chevrolet Corvette Side Sensor
PartNumber: 10362536Product Specifications- Notes: Z06 & Zr1
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 4.2 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Corvette Side Sensor
Vehicle Fitment- 2008 Chevrolet Corvette | 427 Limited Edition Z06, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$36.02 MSRP:$54.36You Save: $18.34 (34%)OEM (Genuine) 2008 Chevrolet Corvette Front Sensor
PartNumber: 15781091Product Specifications- Notes: Z06 & Zr1
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 2.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Corvette Front Sensor
Vehicle Fitment- 2008 Chevrolet Corvette | 427 Limited Edition Z06, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$22.86 MSRP:$34.51You Save: $11.65 (34%)
FAQ for Air Bag Sensor Repair
Q: How to install the inflatable restraint side impact sensor?
A:
You can install the sensor to the vehicle, the retaining bolts to the inflatable restraint side impact sensor, and the retaining bolts to the inflatable restraint side impact sensor.
By Bob
GM Specialist
01/11/2022Q: How to install the inflatable restraint front-end sensor?
A:
You can install the sensor from the vehicle and the retaining bolts to the inflatable restraint front-end sensor.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the inflatable restraint front-end sensor?
A:
The procedure is to disable the supplemental inflatable restraint (SIR) system, remove the retaining bolts from the inflatable restraint front-end sensor and then remove the sensor from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the inflatable restraint side impact sensor?
A:
You can remove the front side door trim panel, the retaining bolts from the inflatable restraint side impact sensor, and the sensor from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the retaining bolts to the inflatable restraint front-end sensor?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the retaining bolts to the inflatable restraint side impact sensor?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the SDM mounting fasteners?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
28/10/2022Q: What is the installation procedure for the airbag control module?
A:
The procedure is to install the SDM horizontally to the I/P center support system, install the SDM mounting fasteners, install the SDM harness connector to the SDM, install the CPA to the SDM harness connector, and then install the accessory trim plate.
By Bob
GM Specialist
28/10/2022Q: How to remove the airbag control module?
A:
You can remove the accessory trim plate, remove the connector position assurance (CPA) from the sensing and diagnostic module (SDM) harness connector, disconnect the SDM harness connector, remove the SDM mounting fasteners and then remove the SDM from the instrument panel (I/P) center support system.
By Bob
GM Specialist
28/10/2022Q: How to disable the airbag fuse?
A:
You can turn the steering wheel, place the ignition in the OFF position, locate and remove the fuse(s) supplying power to the sensing and diagnostic module (SDM), and then wait 1 minute before working on the system.
By Bob
GM Specialist
28/10/2022See more FAQs (6)