2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Wiper Linkage Repair
Q: What is the recommended bolt torque for the wiper arm nut?
A:
The recommended bolt torque is 33-38 N.m (24-28 lb-ft).
By Bob
GM Specialist
14/02/2022
Q: What special tool will I be needing when servicing the Windshield Wiper Arm?
A:
You will be needing a wiper arm puller.
By Omar
GM Specialist
09/02/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the Washer Pump?
A:
Install the new Washer Pump and grommet. Use clean washer solvent on the washer pump to aid in the installation of the new washer pump into the grommet. Apply downward pressure onto the pump. Secure the top of the pump to the washer container. Install the washer solvent container. Close the hood.
Q: What is the installation procedure for the Windshield Wiper Blade?
A:
Position the Wiper Blade in the inside radius of the wiper arm hook. Insert the hook of the wiper arm through the opening in the wiper blade. Pull upward until the locking tab of the pivot engages the slot in the hook. Carefully lower the wiper arm and blade onto the windshield.
Q: How do you install the Windshield Wiper Motor?
A:
Install the wiper motor onto the wiper transmission frame. Install the bolts to secure the motor to the frame. Install the transmission drive link socket onto the crank arm ball of the wiper motor. Install the wiper transmission to the plenum.