< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Colorado
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Colorado Seat Back Heater
PartNumber: 89041526
Product Specifications- Notes: Bucket Seats, W/Adjustable Headrest
- Location: Driver Side; Passenger Side
- Other Names: Element, Seat Back Heater
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Colorado Seat Back Heater
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2008 Chevrolet Colorado Seat Heater
PartNumber: 19207504
Product Specifications- Notes: Bucket Seats, W/Adjustable Headrest
- Location: Driver Side; Passenger Side
- Other Names: Element, Seat Heater
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19122006
- Part Description: 2008 Chevrolet Colorado Seat Heater
Vehicle Fitment- 2008 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Seat Heater Pad Repair
Q: How do I test the Driver Heated Seat Switch Circuit?
A:
With the ignition OFF, disconnect the harness connector at the heated seat switch. Test for less than 1 ohm of resistance between the ground circuit terminal E and the ground. Ignition ON, verify that a test lamp illuminates between the ignition circuit terminal C and the ground. If all circuits test normal, test or replace the heated seat switch.
By Bob
GM Specialist
21/02/2022Q: What is the installation procedure for the Driver Seat and Passenger Seat Back Cushion Heater?
A:
Install the heater element electrical harness through the hole in the pad. Install the adhesive-backed heater element to the pad. Connect the electrical harness to the heater element. Install the seat back cover. Install the seat in the vehicle.
By Bob
GM Specialist
18/02/2022Q: What is the installation procedure for the Driver Seat and Passenger Seat Cushion Heater?
A:
Install the heater element electrical harness through the hole in the pad. Install the adhesive-backed heater element to the pad by pressing it in place. Connect the electrical harness to the heater element. Install the front seat cushion cover and pad. Install the front seat assembly in the vehicle.
By Omar
GM Specialist
18/02/2022Q: What is the removal procedure for the Driver Seat and Passenger Seat Back Cushion Heater?
A:
Remove the seat from the vehicle. Remove the seat back cover to expose the heater element. Disconnect the electrical harness from the heater element. Remove the heater element. Pull the heater-element electrical harness through the hole in the pad.
By Bob
GM Specialist
14/02/2022Q: What is the removal procedure for the Driver Seat and Passenger Seat Cushion Heater?
A:
Remove the front seat assembly from the vehicle. Remove the front seat cushion cover and pad. Disconnect the electrical harness. Remove the heater element. Pull the heater-element electrical harness through the hole in the pad.
By Omar
GM Specialist
14/02/2022Q: What is the Visual/Physical Inspection procedure?
A:
Inspect for aftermarket devices that could affect the operation of the heated seat system. Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
By Omar
GM Specialist
10/02/2022Q: What should be done before servicing the Front Seat Heater Control Module?
A:
Remove the front seat.
By Bob
GM Specialist
10/02/2022See more FAQs (2)