FAQ for Seat Cushion Pad Repair
Q: How many nuts will be needed when installing the seat cushion frame to the seat adjuster?
A:
You will be needing 4 nuts.
By OmarGM Specialist
21/02/2022 Q: What is the installation procedure for the Driver Seat and Passenger Seat Back Cushion Finish Panel?
A:
Position the seat back panel on the seat-back frame. Install the seat back panel to the frame. Install the hog ring fasteners to the bottom of the seat back panel. Install the front seat back cover and pad. Install the seat in the vehicle.
By OmarGM Specialist
18/02/2022 Q: What is the installation procedure for the Front Seat Back Frame?
A:
Install the seat back frame to the seat back recliner mechanism. Install the lumbar assembly. Install the seat back pad and cover. Install the seat in the vehicle.
By OmarGM Specialist
18/02/2022 Q: What is the installation procedure for the Rear Seat Back?
A:
Install the seat back frame. Install the bolt securing the seat back frame to the seat cushion frame. Install the screw securing the side trim covers to the seat cushion frame.
By OmarGM Specialist
17/02/2022 Q: What is the installation procedure for the Rear Seat Cushion Cover and Pad?
A:
Install the seat cushion cover over the seat frame/pad. Install the J-strips on the cover. Install the rear folding seat cushion in the vehicle.
By OmarGM Specialist
17/02/2022 Q: What is the installation procedure for the Rear Seat Cushion Frame?
A:
Install the rear seat cushion cover and pad to the frame. Install the rear seat back assembly. Install the rear cupholder. Install the rear bench seat cushion in the vehicle.
By BobGM Specialist
17/02/2022 Q: What is the installation procedure for the Seat Cushion Outer Trim Panel?
A:
Align the front seat cushion outer trim panel to the seat assembly. Install the 3 seat cushion outer trim panel mounting screws. Install the seat back recliner handle.
By OmarGM Specialist
16/02/2022 Q: What is the recommended bolt torque for the front seat belt buckle bolt?
A:
The recommended bolt torque is 55 N.m (41 lb-ft).
By OmarGM Specialist
15/02/2022 Q: What is the recommended bolt torque for the front seat recliner bolts?
A:
The recommended bolt torque is 24 N.m (18 lb-ft).
By BobGM Specialist
15/02/2022 Q: What is the removal procedure for the Driver Seat and Passenger Seat Back Cushion Finish Panel?
A:
Remove the seat from the vehicle. Remove the front seat back cover and pad. Remove the hog ring fasteners on the bottom of the seat back panel. Remove the push-pin fastener from the top of the seat back panel. Remove the seat-back panel.
By OmarGM Specialist
14/02/2022 See more FAQs (11)