< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Colorado
< Back to View All
Car Bulbs
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Colorado Cargo Lamp Bulb
PartNumber: 9437173
Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Colorado Cargo Lamp Bulb
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$3.42 MSRP:$6.18You Save: $2.76 (45%)
OEM (Genuine) 2008 Chevrolet Colorado Bulb, Front Turn Signal Lamp
PartNumber: 15862271
Product Specifications- Notes: Canyon, Colorado; Front; Amber; W/O Xtreme Pkg
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.3 x 2.2 x 2.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999367, 10319395, 13500810, 01999367, 10351661
- Part Description: 2008 Chevrolet Colorado Bulb, Front Turn Signal Lamp
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$12.61
OEM (Genuine) 2008 Chevrolet Colorado Stoplamp Bulb
PartNumber: 9441839
Product Specifications- Item Dimensions: 4.2 x 3.1 x 2.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 15883346
- Part Description: 2008 Chevrolet Colorado Stoplamp Bulb
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$2.72 MSRP:$4.89You Save: $2.17 (45%)
FAQ for Parking Light Bulb Repair
Q: What is the installation procedure for the Park/Turn Signal/Side Marker Lamp Bulb?
A:
Secure the bulbs into the bulb sockets and to the lamp assembly. Insert the inside edge of the lamp tabs into the grille support. Rotate the lamp assembly into the fender bracket. Push on the outboard edge of the lamp until an audible click is heard, when the lamp assembly is secure to the fender. Inspect the lamps for proper operation.
By Omar
GM Specialist
17/02/2022Q: What is the removal procedure for the Park/Turn Signal/Side Marker Lamp Bulb?
A:
Ensure that the headlamp switch is in the OFF position and the ignition switch is in the LOCK position. Open the hood. Release the locking tab on the park, turn, and daytime running lamp assembly. Rotate the outward edge of the lamp assembly forward. Release the park/turn signal lamp socket. Remove the park, turn the signal lamp bulb.
By Bob
GM Specialist
11/02/2022