Part Description: 2008 Chevrolet Colorado Muffler & Pipe
More Info
Vehicle Fitment
2008 Chevrolet Colorado | LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2008 Chevrolet Colorado Muffler & Pipe
More Info
Vehicle Fitment
2008 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Muffler Repair
Q: How do you gain clearance to remove the muffler?
A:
Remove the lower shock absorber nuts and bolts. Remove the right rear leaf spring nut and bolt. Wedge a block of wood between the frame and the rear axle.
By Bob
GM Specialist
21/02/2022
Q: What is the recommended bolt torque for the lower shock absorber bolts and nuts?
A:
The recommended bolt torque is 95 N.m (70 lb-ft).
By Bob
GM Specialist
15/02/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the Exhaust Manifold?
A:
Place a NEW Exhaust Manifold gasket onto the cylinder head. Position the exhaust manifold to the cylinder head. Apply thread lock GM P/N 12345493 (Canadian P/N 10953488) to the exhaust manifold bolt threads. Install the exhaust manifold bolts.
Q: What is the installation procedure for the Exhaust Pipe Heat Shield?
A:
Position the exhaust pipe heat shield to the floor panel studs. Install the 4 nuts securing the heat shield to the floor panel. Lower the vehicle.
Q: What is the installation procedure for the Exhaust Seal?
A:
Position the catalytic converter to the exhaust manifold. Install the 3 nuts attaching the catalytic converter to the exhaust manifold. Lower the vehicle.