< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Colorado
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Colorado Latch
PartNumber: 15870145
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 7.8 x 3.7 x 11.1 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97256656, 15848511
- Part Description: 2008 Chevrolet Colorado Latch
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$96.44 MSRP:$151.68You Save: $55.24 (37%)
FAQ for Hood Latch Repair
Q: What is the adjustment procedure for the Hood Latch?
A:
Loosen the bolts retaining the hood latch to the radiator support and the support bracket. Move the hood latch from side to side until the striker enters the center of the latch assembly.
By Bob
GM Specialist
21/02/2022Q: What is the installation procedure for the Hood Front Seal?
A:
Open the hood. Install the front hood seal by pressing the retainers into the hood openings. Close the hood.
By Bob
GM Specialist
18/02/2022Q: What is the installation procedure for the Hood Rear Seal?
A:
Position the seal on the upper cowl panel. Insert each retainer into the holes in the body. Close the hood.
By Omar
GM Specialist
18/02/2022Q: What is the recommended bolt torque for the bolts which retain the latch to the radiator support?
A:
The recommended bolt torque is 10 N.m (89 lb in).
By Omar
GM Specialist
16/02/2022Q: What is the removal procedure for the Hood Front Seal?
A:
Open the hood. Remove the front hood seal by pulling downward on the seal, starting from one end.
By Bob
GM Specialist
12/02/2022Q: What is the removal procedure for the Hood Rear Seal?
A:
Open the hood. Grasp the rear hood seal at each retainer and lift upwards to remove. Remove the seal from the upper cowl panel.
By Omar
GM Specialist
12/02/2022See more FAQs (1)