FAQ for Door Seal Repair
Q: What is the installation procedure for the Auxiliary Weatherstrip?
A:
Install the auxiliary weatherstrip to the roof pinch-weld flange by pressing the weatherstrip onto the roof flange, until it is fully seated. Close the front and rear doors, as necessary.
By OmarGM Specialist
20/02/2022 Q: What is the installation procedure for the Front Door Opening Weatherstrip?
A:
Align the paint dot on the front door weatherstrip to the notch in the upper rear corner of the pitch-weld flange. Starting at the notch in the upper rear corner, press the front door opening weatherstrip onto the pinchweld flange until it is fully seated. Pull the cord on the front door opening weatherstrip, ensuring the weatherstrip lip overlaps the interior trim panels and headliner. Close the front door.
By BobGM Specialist
18/02/2022 Q: What is the installation procedure for the Front Side Door Weatherstrip?
A:
Position the weatherstrip to the front door. Install the upper weatherstrip mold to the door. Install the weatherstrip around the front door frame using the integral retainers. Close the front door.
By BobGM Specialist
18/02/2022 Q: What is the installation procedure for the Front Side Door Window Belt Outer Sealing Strip?
A:
Position the front door outer belt sealing strip to the front door pinch-weld flange. Install the sealing strip to the pinch-weld flangeInstall the outside rearview mirror. Raise the front door window.
By OmarGM Specialist
18/02/2022 Q: What is the installation procedure for the Front Side Door Window Weatherstrip?
A:
Position the front door window weatherstrip to the front door. Insert the lower window channel weatherstrip between the door inner and outer panels. Locate the window weatherstrip to the door frame. Firmly seat the window weatherstrip into the front door window channel. Install the front door window. Install the front window outer belt sealing strip. Install the front door water deflector. Install the front door trim panel.
By OmarGM Specialist
18/02/2022 Q: What is the installation procedure for the Rear Door Opening Weatherstrip?
A:
Position the rear door opening weatherstrip to the pinch-weld flange. Starting at the upper rear corner, press the rear door opening weatherstrip onto the pinch-weld flange until it is fully seated. Install the lower center pillar trim panel. Pull the cord on the rear door opening weatherstrip ensuring the weatherstrip lip overlaps the interior trim panels and headliner. Close the rear door.
By BobGM Specialist
17/02/2022 Q: What is the installation procedure for the Rear Door Weatherstrip?
A:
Position the weatherstrip to the rear door. Install the weatherstrip around the rear door frame using the integral retainers. Close the rear door.
By OmarGM Specialist
17/02/2022 Q: What is the installation procedure for the Rear Side Access Door Auxiliary Weatherstrip?
A:
Install the rear door auxiliary weatherstrip to the rear door pinch-weld flange, by pressing the weatherstrip into place until it is fully seated. Close the front and side doors.
By OmarGM Specialist
17/02/2022 Q: What is the installation procedure for the Rear Side Door Wedge?
A:
Install the wedge to the side access door by inserting the tabs into the slots on the door and rotating the wedge up until the retaining clip is fully seated. Close the rear side access door.
By OmarGM Specialist
16/02/2022 Q: What is the installation procedure for the Weatherstrip Replacement Rear Side Access Door?
A:
Position the weatherstrip to the rear side access door. Install the upper molded detail lower. Install the weatherstrip around the rear door frame using the integral retainers. Close the front and rear side access doors.
By OmarGM Specialist
16/02/2022 See more FAQs (16)