< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Location
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Colorado Rear Wheel Bearing
PartNumber: 12479031
Product Specifications- Notes: Canyon, Colorado
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.4 x 3.4 x 1.2 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 9442126, 09442126
- Part Description: 2008 Chevrolet Colorado Rear Wheel Bearing
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$46.58 MSRP:$92.44You Save: $45.86 (50%)
National® Front Outer Differential Pinion Bearing for 2008 Chevrolet Colorado
PartNumber: M802048Product Specifications- Notes: with AAM Axle; with 8in Ring Gear
- UPC: 724956020683
- Part Description: 2008 Chevrolet Colorado Front Outer Differential Pinion Bearing
Vehicle Fitment- 2008 Chevrolet Colorado | All Trims | All Engines
$16.67
OEM (Genuine) 2008 Chevrolet Colorado Outer Pinion Bearing
PartNumber: 9417784
Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.0 x 3.0 x 1.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Colorado Outer Pinion Bearing
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$36.11 MSRP:$68.16You Save: $32.05 (48%)
OEM (Genuine) 2008 Chevrolet Colorado Front Pinion Bearing
PartNumber: 22510042
Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 3.6 x 3.6 x 1.6 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Colorado Front Pinion Bearing
Vehicle Fitment- 2008 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$66.26 MSRP:$125.04You Save: $58.78 (48%)OEM (Genuine) 2008 Chevrolet Colorado Side Bearings
PartNumber: 25824250
Product Specifications- Notes: Canyon, Colorado
- Other Names: Side Bearings
- Item Dimensions: 4.3 x 4.1 x 2.1 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 09418390, 9418390
- Part Description: 2008 Chevrolet Colorado Side Bearings
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$72.31 MSRP:$136.46You Save: $64.15 (48%)OEM (Genuine) 2008 Chevrolet Colorado Outer Pinion Bearing
PartNumber: 23243839
Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 4.1 x 4.2 x 2.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221, 09418357
- Part Description: 2008 Chevrolet Colorado Outer Pinion Bearing
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$61.58 MSRP:$116.20You Save: $54.62 (48%)
National® Rear Inner Differential Pinion Bearing for 2008 Chevrolet Colorado
PartNumber: HM89249Product Specifications- Notes: w/AAM Axle; w/Independent Carrier Assy; w/7.6in Ring Gear
- Part Description: 2008 Chevrolet Colorado Rear Inner Differential Pinion Bearing
Vehicle Fitment- 2008 Chevrolet Colorado | All Trims | All Engines
$24.88
FAQ for Differential Pinion Bearing Repair
Q: What is the recommended bolt torque for the rotating torque of the pinion?
A:
The recommended bolt torque is 1.0-2.8 N.m (10-25 lb in) for used bearings, or 1.7-3.4 N.m (15-30 lb in) for new bearings.
By Omar
GM Specialist
15/02/2022Q: What is the recommended bolt torque for the new ring gear bolts?
A:
The recommended bolt torque is 120 N.m (89 lb-ft).
By Bob
GM Specialist
14/02/2022Q: What is the removal procedure for the Drive Pinion and Ring Gear?
A:
Raise the vehicle. Remove the axle shafts. Remove the differential assembly. Remove the drive pinion yoke and the oil seal. Install the J 22536 as shown. Drive the pinion out. Remove the collapsible spacer. Remove the pinion bearings and the cups. Remove the left-hand threaded ring gear bolts. Discard the bolts. Remove the ring gear from the differential. Drive the gear off with a brass drift if necessary.
By Omar
GM Specialist
14/02/2022Q: What is the removal procedure for the Drive Pinion Bearings?
A:
Raise the vehicle. Remove the differential assembly. Remove the drive pinion from the axle. For the 8.6-inch axle, install the J 45871 around the pinion bearing and the J 22912-B in the inverted position around the J 45871. Press the bearing off of the pinionRemove the shim. Remove the outer pinion-bearing cup. Remove the inner pinion bearing cup from the axle housing.
By Bob
GM Specialist
14/02/2022Q: What should be noticed when installing the Drive Pinion Bearings?
A:
If the rotating torque is exceeded, the pinion will have to be removed and a new collapsible spacer installed.
By Omar
GM Specialist
10/02/2022Q: What should you do before disassembly?
A:
Observe and mark the positions of all the driveline components, relative to the propeller shaft and the axles.
By Omar
GM Specialist
09/02/2022Q: What special tool will I need when servicing the Drive Pinion Bearings?
A:
You will need an outer bearing race installer, universal driver handle, rear pinion bearing race installer, flange and pulley holding tool, split-plate bearing puller, pinion cone, side bearing installer, pinion oil seal installer, and extension housing oil pump/seal installer.
By Omar
GM Specialist
09/02/2022Q: What special tool will I need when servicing the Drive Pinion Flange/Yoke and/or Oil Seal?
A:
You will need a flange and pulley holding tool, a pinion oil seal installer, and an extension housing oil pump/seal installer.
By Bob
GM Specialist
09/02/2022See more FAQs (3)