Other Names: Recovery Tank, Reservoir, Washer Reservoir
Item Dimensions: 14.9 x 13.5 x 11.0 inches
Item Weight: 4.50 Pounds
Fitment Type: Direct Replacement
Part Description: 2008 Chevrolet Colorado Container Asm-Windshield Washer Solvent (Gmt355)
More Info
Vehicle Fitment
2008 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Coolant Reservoir Repair
Q: How do you install the Coolant Recovery Reservoir?
A:
Install the coolant recovery reservoir. Install the retaining bolt to the front wheelhouse panel. Install the radiator vent hose to the coolant recovery reservoir. Install the bolt securing the coolant recovery reservoir to the coolant recovery reservoir bracket. Install the overflow hose to the coolant recovery reservoir. Install the air cleaner assembly. Fill the cooling system.
By Omar
GM Specialist
21/02/2022
Q: What is the installation procedure for the Radiator Vent Inlet Hose?
A:
Install the radiator vent inlet hose to the coolant recovery reservoir. Install the retaining clips to the radiator vent inlet hose. Install the radiator vent inlet hose to the radiator. Fill the cooling system.
By Bob
GM Specialist
17/02/2022
Q: What is the recommended bolt torque for the retaining bolt to the front wheelhouse panel?
A:
The recommended bolt torque is 12 N.m (106 lb in).
By Omar
GM Specialist
15/02/2022
Q: What is the removal procedure for the Radiator Vent Inlet Hose?
A:
Partially drain the cooling system. Remove the vent inlet hose. Remove the retaining clips from the radiator vent inlet hose. Remove the radiator vent inlet hose from the coolant recovery reservoir.
By Bob
GM Specialist
11/02/2022
FAQ for Other Repair Info
Q: How do you remove the Radiator Outlet Hose?
A:
Drain the coolant. Reposition the outlet Radiator Hose clamp away from the thermostat housing. Remove the outlet radiator hose from the thermostat. Raise the vehicle. Reposition the outlet radiator hose clamp away from the radiator. Remove the outlet radiator hose from the radiator.
Q: What should be noticed when removing the Radiator Cap?
A:
To avoid being burned, do not remove the Radiator Cap or surge tank cap while the engine is hot.
Q: What is the installation procedure for the Fan Shroud?
A:
Install the fan shroud on the vehicle. Rotate the slip ring to the original position. Install the differential vent hose retainer, the A/C suction hose retainer, and the A/C discharge hose retainer. Install the radiator outlet hose.