< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Colorado
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Colorado AC Temperature Sensor
PartNumber: 25775833
Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 2.1 x 1.8 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10396844
- Part Description: 2008 Chevrolet Colorado AC Temperature Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$5.51 MSRP:$9.96You Save: $4.45 (45%)
OEM (Genuine) 2008 Chevrolet Colorado Sensor
PartNumber: 15865791
Product Specifications- Notes: 2.8 & 2.9 Liter, 2008-12; 3.5 & 3.7 Liter, 2008-12; Canyon, Colorado
- Item Dimensions: 4.4 x 4.1 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12576410
- Part Description: 2008 Chevrolet Colorado Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$77.66 MSRP:$146.54You Save: $68.88 (48%)
FAQ for Air Temperature Sensor Repair
Q: What is the installation procedure for the Ambient Air Temperature Sensor?
A:
Position the sensor to the radiator support bracket, install the sensor, connect the electrical connector to the ambient air temperature sensor, and install the air inlet grille.
By Omar
GM Specialist
20/02/2022Q: What is the installation procedure for the Evaporator Temperature Sensor?
A:
Install the evaporator temperature sensor to the evaporator core. Align the evaporator temperature sensor wires with the opening in the upper HVAC module case. Install the evaporator core. Cut the evaporator temperature sensor. Connect the original sensor wire to the replacement assembly. Connect the electrical connector. Install the mounting screw to the control module. Install the radio.
By Omar
GM Specialist
18/02/2022Q: What is the recommended bolt torque for the mounting screw to the control module?
A:
The recommended bolt torque is 1.9 N.m (17 lb in).
By Bob
GM Specialist
15/02/2022Q: What is the removal procedure for the Ambient Air Temperature Sensor?
A:
Remove the air inlet grille, disconnect the electrical connector to the ambient air temperature sensor, release the tabs retaining the sensor to the radiator support bracket, and remove the sensor.
By Bob
GM Specialist
14/02/2022Q: What is the removal procedure for the Evaporator Temperature Sensor?
A:
Remove the radio. Remove the mounting screw. Disconnect the electrical connector. Cut the evaporator temperature sensor wire. Remove the evaporator core. Remove the evaporator temperature sensor.
By Omar
GM Specialist
13/02/2022