< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Colorado
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Colorado Passenger Discriminating Sensor
PartNumber: 25980812
Product Specifications- Notes: Canyon, Colorado; W/O Off Road
- Item Dimensions: 4.4 x 2.3 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Colorado Passenger Discriminating Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$225.82 MSRP:$340.68You Save: $114.86 (34%)
Dorman® OE Solutions Air Bag Impact Sensor for 2008 Chevrolet Colorado
PartNumber: 590-209Product Specifications- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 15779005
- Package Quantity: 1
- UPC: 019495423652
- Part Description: 2008 Chevrolet Colorado OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | All Trims | All Engines
$69.76OEM (Genuine) 2008 Chevrolet Colorado Front Sensor
PartNumber: 15779005Product Specifications- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15176442, 10395111, 15106280
- Replaced by: 85598010
- Part Description: 2008 Chevrolet Colorado Front Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$156.48 MSRP:$236.08You Save: $79.60 (34%)OEM (Genuine) 2008 Chevrolet Colorado Passenger Discriminating Sensor
PartNumber: 20864450Product Specifications- Notes: Canyon, Colorado; W/Off Road
- Item Dimensions: 4.2 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Colorado Passenger Discriminating Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$170.12 MSRP:$256.65You Save: $86.53 (34%)
OEM (Genuine) 2008 Chevrolet Colorado Side Sensor
PartNumber: 10368336
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15106279
- Part Description: 2008 Chevrolet Colorado Side Sensor
Vehicle Fitment- 2008 Chevrolet Colorado | LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$23.97 MSRP:$36.17You Save: $12.20 (34%)
FAQ for Air Bag Sensor Repair
Q: How do you install the Inflatable Restraint Steering Wheel Module?
A:
Position the inflatable restraint module on the steering wheel. Connect the electrical connectors. Connect the horn electrical connector. Position the alignment posts of the inflatable restraint module to the holes that are located on the steering wheel housing. Push the inflatable restraint module into the steering wheel to engage and latch the leaf spring fasteners. After installation, pull up the sides of the inflatable restraint module to ensure the leaf spring fasteners are engaged. Enable the inflatable restraint steering wheel module.
By Bob
GM Specialist
21/02/2022Q: How do you install the Inflatable Restraint Vehicle Rollover Sensor?
A:
Install the nuts securing the rollover sensor to the floor panel. Connect the electrical connectors. Install the carpet. Enable the SIR system.
By Omar
GM Specialist
21/02/2022Q: What components will be needing replacement after a collision involving side airbag deployment?
A:
Inflatable restraint roof rail module, inflatable restraint side impact sensors (SIS) (left/right), inflatable restraint side impact module (left/right), inflatable restraint SDM, seat belt pretensioner.
By Bob
GM Specialist
21/02/2022Q: What is the Enabling procedure for the Air Bag Fuse?
A:
Place the ignition in the OFF position, install the fuse supplying power to the SDM, turn the ignition switch to the ON position, and perform the Diagnostic System Check.
By Bob
GM Specialist
20/02/2022Q: What is the installation procedure for the Inflatable Restraint Sensing and Diagnostic Module?
A:
Install the SDM and tighten the SDM nuts to 9 N.m (79 LB IN), connect the electrical connector, fold the carpet back down over the SDM, install the floor console, enable the SIR system, and program the SDM.
By Omar
GM Specialist
17/02/2022Q: What is the recommended bolt torque for the 2 fasteners retaining the discriminating sensor assembly to the radiator support?
A:
The recommended bolt torque is 9 N.m (80 lb in).
By Omar
GM Specialist
16/02/2022Q: What is the recommended bolt torque for the fasteners retaining the PSIR bracket to the I/P structure?
A:
The recommended bolt torque is 9 N.m (80 lb in).
By Bob
GM Specialist
15/02/2022Q: What is the recommended bolt torque for the nuts securing the rollover sensor to the floor panel?
A:
The recommended bolt torque is 10 N.m (88 lb in).
By Bob
GM Specialist
15/02/2022Q: What is the recommended bolt torque for the roof rail air bag module bolts?
A:
The recommended bolt torque is 9 N.m (79 lb in).
By Bob
GM Specialist
15/02/2022Q: What is the recommended bolt torque for the screws which retain the side impact sensor to the door?
A:
The recommended bolt torque is 9 N.m (79 lb in).
By Omar
GM Specialist
15/02/2022See more FAQs (12)