< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Aveo
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Location
- Brands
- Prices
OEM (Genuine) 2008 Chevrolet Aveo Hub & Bearing
PartNumber: 95903587
Product Specifications- Notes: Sedan, W/O ABS; Aveo, Aveo5; W/O ABS
- Location: Driver Side; Passenger Side
- Other Names: Hub, Hub & Bearing
- Item Dimensions: 7.2 x 6.2 x 6.4 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96471776
- Part Description: 2008 Chevrolet Aveo Hub & Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
$102.46 MSRP:$185.46You Save: $83.00 (45%)
Centric® Premium™ Front Passenger Side Double Row Wheel Bearing for 2008 Chevrolet Aveo
PartNumber: 412.91001Product Specifications- UPC: 805890570769
- Part Description: 2008 Chevrolet Aveo Premium™ Front Passenger Side Double Row Wheel Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | All Trims | All Engines
$26.47
SKF® Rear Driver Side Sealed Wheel Bearing for 2008 Chevrolet Aveo
PartNumber: GRW275Product Specifications- Notes: Sealed
- Inner Diameter: 0.9842"
- Outer Diameter: 2.0472"
- UPC: 085311456500
- Width: 1.4566"
- Part Description: 2008 Chevrolet Aveo Rear Driver Side Sealed Wheel Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | LS | All Engines
- 2008 Chevrolet Aveo | LT | All Engines
- 2008 Chevrolet Aveo | All Trims | All Engines
$73.62
FAG® Front Wheel Bearing for 2008 Chevrolet Aveo
PartNumber: 532066DBProduct Specifications- Notes: FAG Global# 532066DB
- Height: 37 mm
- Inside Diameter: 34 mm
- Outside Diameter: 2.52"
- UPC: 670774082993
- Part Description: 2008 Chevrolet Aveo Front Wheel Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | All Trims | All Engines
$37.71
Quality-Built® WHEEL BEARING for 2008 Chevrolet Aveo
PartNumber: WH510066Product Specifications- Notes: Wheel Bearing; Axle Nut Torque Spec: 221 ft-lbs / 300Nm
- Gasket or Seal Included: No
- Greaseable: No
- Hub Pilot Diameter (Inch): 2.518
- Material: Steel
- Product Condition: New
- UPC: 029175921057
- Part Description: 2008 Chevrolet Aveo WHEEL BEARING
Vehicle Fitment- 2008 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
$13.99
National® Front Driver Side Inner Wheel Bearing and Race Set for 2008 Chevrolet Aveo
PartNumber: A-18Product Specifications- Notes: Taper Bearing Set Incls Cup & Cone; w/Getrag F16-5 Trans
- UPC: 724956000807
- Part Description: 2008 Chevrolet Aveo Front Driver Side Inner Wheel Bearing and Race Set
Vehicle Fitment- 2008 Chevrolet Aveo | All Trims | All Engines
$9.65
OEM (Genuine) 2008 Chevrolet Aveo Bearing
PartNumber: 95983139
Product Specifications- Notes: Sedan; Aveo, Aveo5
- Location: Driver Side; Passenger Side
- Other Names: Bearing, Wheel Bearing
- Item Dimensions: 3.2 x 3.0 x 1.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 94536117, 94535247, 94535249
- Part Description: 2008 Chevrolet Aveo Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$130.59 MSRP:$246.42You Save: $115.83 (48%)
SKF® Front Passenger Side Wheel Bearing for 2008 Chevrolet Aveo
PartNumber: B35Product Specifications- Notes: Sealed
- Outer Diameter: 2.5197"
- UPC: 085311068802
- Part Description: 2008 Chevrolet Aveo Front Passenger Side Wheel Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | All Trims | All Engines
$30.68
OEM (Genuine) 2008 Chevrolet Aveo Hub & Bearing
PartNumber: 95903586
Product Specifications- Notes: Sedan, W/ABS; Aveo, Aveo5; W/ABS
- Location: Driver Side; Passenger Side
- Other Names: Hub, Hub & Bearing
- Item Dimensions: 9.3 x 8.4 x 6.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96471775
- Part Description: 2008 Chevrolet Aveo Hub & Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
$101.64 MSRP:$191.80You Save: $90.16 (48%)
National® Front Driver Side Wheel Bearing for 2008 Chevrolet Aveo
PartNumber: B-35Product Specifications- Bore: 34.000 mm
- Design: Double Row Angular Contact
- Inner Race Bore: 34.000 mm
- Inner Race Radius: 2.540 mm
- Inner Race Width: 1.457"
- Outer Diameter: 2.520"
- Outer Race Outside Diameter: 64.000 mm
- Outer Race Width: 1.457"
- Series: FWDB
- Type: E-3"
- Width: 1.457"
- Part Description: 2008 Chevrolet Aveo Front Driver Side Wheel Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | All Trims | All Engines
$43.20
Centric® Premium™ Wheel Bearing for 2008 Chevrolet Aveo
PartNumber: 410.62001Product Specifications- UPC: 805890648246
- Part Description: 2008 Chevrolet Aveo Premium™ Wheel Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | All Trims | All Engines
National® Wheel Bearing for 2008 Chevrolet Aveo
PartNumber: 516012Product Specifications- Footnote: GEN1
- Part Description: 2008 Chevrolet Aveo Wheel Bearing
Vehicle Fitment- 2008 Chevrolet Aveo | All Trims | All Engines
FAQ for Wheel Bearing Repair
Q: How to remove the terminals from the connector?
A:
The proper way is to locate the connector position assurance (CPA) on the top of the wire dress cover, slide the lever lock forward while pressing down on the lever lock release tab, disconnect the connector from the component, release the rear lower half of the wire dress cover, release the tabs that are holding the wire dress cover to the connector body, remove the nose piece by inserting a small flat-blade tool into the slots on both ends of the connector body, and then gently pull the wire out of the back of the connector.
By Bob
GM Specialist
01/11/2022Q: How to disassemble the wheel hub, bearing, knuckle, and seal?
A:
The proper way is to remove the wheel hub, bearing, knuckle, and brake shield as an assembly, remove the brake shield, remove the special tools from the knuckle, remove the wheel bearing from the knuckle, and then remove the special tools from the knuckle.
By Bob
GM Specialist
01/11/2022Q: How to assemble the wheel hub, bearing, knuckle, and seal?
A:
The proper way is to install the wheel bearing to the knuckle, install the retaining ring to the knuckle, install the hub to the wheel bearing, and then install the wheel hub, bearing, knuckle, and brake shield as an assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the JST connectors?
A:
The proper way is to remove the connector from the component, locate the two indents of the terminal position assurance (TPA) located on the bottom of the connector body, raise the TPA on both sides of the connector, release the terminals by inserting the tool into the left side of the terminal release cavity as shown in the graphic, and then pull the wire out of the back of the connector.
By Bob
GM Specialist
01/11/2022Q: How to install the rear wheel bearing and hub?
A:
The proper way is to install the wheel bearing and hub assembly to the spindle, install the caulking nut to the spindle, install the brake drum, and then install the rear wheel speed sensor.
By Bob
GM Specialist
01/11/2022Q: How to remove the rear wheel bearing and hub?
A:
The proper way is to remove the rear wheel speed sensor, remove the brake drum, remove the caulking nut, and then remove the wheel bearing and hub assembly from the spindle.
By Bob
GM Specialist
01/11/2022See more FAQs (1)