< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Aveo
< Back to View All
Clutches, Linkages & Flywheels
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Aveo Release Fork
PartNumber: 94580796
Product Specifications- Notes: Aveo, Aveo5
- Other Names: Release Fork
- Item Dimensions: 3.6 x 3.6 x 1.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Aveo Release Fork
Vehicle Fitment- 2008 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$16.16 MSRP:$26.73You Save: $10.57 (40%)
FAQ for Clutch Forks Repair
Q: How to remove the clutch pedal cruise control release switch?
A:
The proper way is to disconnect the cruise control clutch pedal switch electrical connector, and then turn the switch 90 degrees counterclockwise and remove it.
By Bob
GM Specialist
01/11/2022Q: How to install the clutch release arm?
A:
The proper way is to install the release arm to the release shaft, align it to the marked position, tighten the release arm bolt and nut, install the clutch control cable to the release arm, install the clutch control cable adjusting nut, and then adjust the clutch cable.
By Bob
GM Specialist
01/11/2022Q: How to install the clutch, pressure plate, and pilot bearing?
A:
The proper way is to align the pressure plate and the clutch disc onto the flywheel using DT 46551, install the pressure plate bolts, and then install the transaxle into the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the clutch, pressure plate, and pilot bearing?
A:
The proper way is to remove the transaxle from the vehicle, remove the pressure plate bolts and the pressure plate, and then remove the clutch disc from the flywheel.
By Bob
GM Specialist
01/11/2022Q: How to remove the clutch release arm?
A:
The proper way is to remove the adjusting nut for the clutch cable, remove the clutch control cable from the release arm, remove the clutch release am retaining bolt and nut, and then remove the release arm.
By Bob
GM Specialist
01/11/2022Q: How to remove the clutch, pressure plate, and pilot bearing?
A:
The proper way is to remove the transaxle from the vehicle, remove the pressure plate bolts and the pressure plate, and then remove the clutch disc from the flywheel.
By Bob
GM Specialist
01/11/2022Q: How to adjust the cruise control clutch switch?
A:
The proper way is to push the switch assembly through the pedal support and turn 90 degrees, hold the clutch pedal to the rest position, connect the cruise control clutch pedal switch electrical connector, and then verify the operation of the clutch switch by operating the cruise control and checking the clutch switch stops operation of the cruise control when the clutch pedal is pressed.
By Bob
GM Specialist
01/11/2022Q: How to install the clutch pedal cruise control release switch?
A:
The proper way is to position the cruise control clutch switch in the pedal support, then turn the switch 90 degrees clockwise, connect the cruise control clutch pedal switch electrical connector, and then adjust the cruise control clutch pedal switch.
By Bob
GM Specialist
01/11/2022See more FAQs (3)