< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Aveo
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Aveo Side Sensor
PartNumber: 96654866
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 1.8 x 1.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Aveo Side Sensor
Vehicle Fitment- 2008 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
$139.21 MSRP:$210.03You Save: $70.82 (34%)
OEM (Genuine) 2008 Chevrolet Aveo Front Impact Sensor
PartNumber: 96654867
Product Specifications- Location: Passenger Side; Driver Side
- Other Names: Front Impact Sensor
- Item Dimensions: 3.3 x 1.9 x 1.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Aveo Front Impact Sensor
Vehicle Fitment- 2008 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
OEM (Genuine) 2008 Chevrolet Aveo Sensor Asm, Inflator Restraint Front End
PartNumber: 96425878
Product Specifications- Notes: Aveo, Aveo5; Notchback
- Other Names: Front Sensor, Impact Sensor
- Item Dimensions: 3.3 x 1.9 x 1.9 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Aveo Sensor Asm, Inflator Restraint Front End
Vehicle Fitment- 2008 Chevrolet Aveo | LS, LT, Special Value | 4 Cyl 1.6 L GAS
OEM (Genuine) 2008 Chevrolet Aveo Sensor, Inflator Restraint Side Imp
PartNumber: 96447641
Product Specifications- Notes: Aveo, Aveo5; Notchback
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.3 x 1.9 x 1.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Aveo Sensor, Inflator Restraint Side Imp
Vehicle Fitment- 2008 Chevrolet Aveo | LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Air Bag Sensor Repair
Q: How to install the inflatable restraint instrument panel module disable switch?
A:
The proper way is to install the passenger airbag disable switch, connect the passenger airbag disable switch connector, and then connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: How to remove the inflatable restraint instrument panel module disable switch?
A:
The proper way is to disconnect the negative battery cable, remove the glove box, disconnect the passenger airbag disable switch connector, and then remove the passenger airbag disable switch by pushing the tab on the upper side of the switch housing.
By Bob
GM Specialist
01/11/2022Q: How to remove the inflatable restraint front-end sensor?
A:
The proper way is to disconnect the negative battery cable, disconnect the connector from the front airbag sensor, remove the front airbag sensor mounting bolt, and then remove the front airbag sensor.
By Bob
GM Specialist
01/11/2022Q: How to remove the inflatable restraint side impact sensor?
A:
The proper way is to remove the lower trim from the center pillar, remove the side airbag sensor mounting bolt, and then remove the side airbag sensor.
By Bob
GM Specialist
01/11/2022Q: How to install the inflatable restraint front-end sensor?
A:
The proper way is to install the front airbag sensor, install the front airbag sensor mounting bolt, connect the connector to the front airbag sensor, and then connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: How to install the inflatable restraint side impact sensor?
A:
The proper way is to install the side airbag sensor, install the side airbag sensor mounting bolt, install the lower trim to the center pillar, and then connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: How to disable the airbag fuse?
A:
The proper way is to turn the steering wheel so that the vehicle's wheels are pointing straight ahead, place the ignition in the OFF position, remove the cover for the I/P fuse center, locate and remove the F1 Fuse from the I/P fuse center, and then wait 1 minute before working on the system.
By Bob
GM Specialist
28/10/2022Q: How to install the inflatable restraint sensing and diagnostic module?
A:
The proper way is to install the SDM, install the SDM mounting bolts, install the connector position assurance lock, and then install the floor console trim bezel.
By Bob
GM Specialist
28/10/2022Q: How to remove the inflatable restraint sensing and diagnostic module?
A:
The proper way is to remove the floor console trim bezel, remove the connector position assurance lock, remove the sensing and diagnostic module (SDM) mounting bolts, and then remove the SDM.
By Bob
GM Specialist
28/10/2022Q: How to enable the airbag fuse?
A:
The proper way is to place the ignition in the OFF position, install the F1 Fuse in the interior fuse center, replace the fuse center cover, use caution while reaching in and turn the ignition switch to the ON position, and then perform the Diagnostic System Check-Vehicle if the AIR BAG warning indicator does not operate as described.
By Bob
GM Specialist
28/10/2022See more FAQs (5)