Part Description: 2008 Chevrolet Avalanche Premium™ Front Outer Steering Tie Rod End
Vehicle Fitment
2008 Chevrolet Avalanche | All Trims | All Engines
$16.75
FAQ for Tie Rod End Repair
Q: How do I remove the Steering Linkage Inner Tie Rod?
A:
Start with removing all traces of oil and dirt and cleaning the threads of the steering linkage inner tie rod. Then Install the steering linkage inner tie rod using the inner tie rod wrench. Next, Install the steering linkage outer tie rod and the engine shield.
By Bob
GM Specialist
05/03/2022
Q: How many bolts does the rear axle tie rod mount have?
A:
The rear axle tie rod mount has 2 bolts.
By Bob
GM Specialist
03/03/2022
Q: What is the recommended bolt torque for the steering linkage inner tie rod?
A:
The recommended bolt torque is 100 Nm (74 lb. in.).
By Omar
GM Specialist
25/02/2022
Q: What should I avoid doing before moving the inner tie rod from the steering gear?
A:
Do not change the steering gear preload adjustment.
By Bob
GM Specialist
24/02/2022
Q: What should you remove before replacing the steering linkage outer tie rod?
A:
You should remove the front tire/wheel from the vehicle.
By Bob
GM Specialist
23/02/2022
FAQ for Other Repair Info
Q: What is the Relay Rod removal procedure?
A:
First, remove the engine shield and the steering linkage shock absorber from the relay rod. Next remove the steering linkage inner tie rods, the idler arm nut, the pitman arm nut, and the relay rod.