FAQ for Shock Absorber Repair
Q: How do I install the shock absorber?
A:
Start with installing the shock absorber and then attaching it by installing the upper and lower nuts and bolts. Reconnect the electronic suspension control connector. Remove the support from the rear axle. remove safety stands and lower the vehicle.
By OmarGM Specialist
07/03/2022 Q: How do I remove the shock absorber?
A:
Start with lifting and supporting the vehicle. Next, you will need to support the rear axle and disconnect the electronic suspension control connector. Then remove the upper and lower shock absorber nut and the bolt to remove the shock absorber.
By OmarGM Specialist
05/03/2022 Q: How many bolts attach to the rear shock absorber?
A:
2 Bolts attach to the rear shock absorber.
By BobGM Specialist
03/03/2022 Q: How many nuts attach to the rear shock absorber?
A:
2nuts attach the rear shock absorber.
By BobGM Specialist
03/03/2022 Q: What is the recommended bolt torque for the front shock absorber nut?
A:
The recommended bolt torque is 50 Nm (37 LB-FT).
By BobGM Specialist
27/02/2022 Q: What is the recommended bolt torque for the rear shock absorber nut?
A:
The recommended bolt torque is 115 Nm (85 LB-FT).
By BobGM Specialist
25/02/2022 Q: What is the recommended bolt torque for the retaining nut?
A:
The recommended bolt torque is 80 Nm (59 LB IN).
By BobGM Specialist
25/02/2022 Q: What is the recommended bolt torque for the shock absorber retaining nut?
A:
The recommended bolt torque is 24 Nm (17 LB-FT).
By BobGM Specialist
25/02/2022 Q: What are the shock absorber and spring assembly service procedures?
A:
Remove the front tire and wheel assembly. Next disconnect the outer tie rod from the steering knuckle. Tighten the shock absorber module bolts to 50 Nm.
By BobGM Specialist
24/02/2022 Q: What special tools will I be needing?
A:
You will need a strut spring compressor.
By BobGM Specialist
22/02/2022 See more FAQs (9)