Part Description: 2008 Chevrolet Avalanche Cable Asm-Parking Brake Intermediate
More Info
Vehicle Fitment
2008 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Parking Brake Cable Repair
Q: How do you install the parking brake rear cable?
A:
You can install the park brake cable, and the bolt, and adjust the park brake.
By Omar
GM Specialist
04/03/2022
Q: How do you remove the park brake cable?
A:
You can remove the parking brake and the park brake cable guide.
By Bob
GM Specialist
04/03/2022
Q: What is the removal procedure for the parking brake rear cable?
A:
The procedure is to disable the park brake cable automatic adjuster, the park brake cable, and the cable from the retaining bracket.
By Bob
GM Specialist
24/02/2022
FAQ for Other Repair Info
Q: How do I install the Rear Axle Lower Control Arm?
A:
Start with placing the Control Arm on the vehicle, next you will need to install the bolts and nuts that attach the lower control arm. Finally, remove the rear axle support and lower the vehicle.
Q: How do I install the shock absorber?
A:
Start with installing the Shock Absorber and then attaching it by installing the upper and lower nuts and bolts. Reconnect the electronic suspension control connector. Remove the support from the rear axle. remove safety stands and lower the vehicle.
Q: How do I remove the front brake caliper?
A:
Start with raising and supporting the vehicle, next you will need to remove the tire and wheel assembly, the brake pads, the brake pad retaining springs, the Brake Caliper mounting bolts, and the brake caliper bracket.