Install the new fuel injector upper/lower O-ring seals, the fuel injectors into the fuel rails, and the retainers. Install the fuel rail bolts and tighten the bolts to 10 Nm. Next install the EVAP tube, purge solenoid, and the canister purge solenoid. After that install the PVC hose, and the negative battery cable stud and tighten the stud to 25 Nm. Install the engine wiring harness bracket nut and tighten the nut to 5 Nm. Finally, install the air cleaner outlet duct.
By BobGM Specialist
01/03/2022