Part Description: 2008 Chevrolet Avalanche Front Drive Axle Inner Shaft
More Info
Vehicle Fitment
2008 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Driveshaft Repair
Q: What is the recommended bolt torque for the yoke retainers and bolts?
A:
The recommended bolt torque is 25 Nm (18 LB-FT).
By Bob
GM Specialist
25/02/2022
Q: What should I avoid doing when removing the propeller shaft?
A:
Do not attempt to remove the shaft by pounding on the yoke ears or using a tool between the yoke and the universal joint. The injection joints may fracture and lead to premature failure of the joint.
By Bob
GM Specialist
23/02/2022
Q: Will the vehicle need to be lifted?
A:
Yes, you will need to lift and support the vehicle.
By Bob
GM Specialist
21/02/2022
FAQ for Other Repair Info
Q: What will need to be cleaned before installation?
A:
The inner and outer race assemblies, The CV Joint cage, and the chrome alloy balls.
Q: Can the same wheel hub seal be reused?
A:
No, it is recommended you replace the wheel hub seal with a new one anytime the assembly is removed from the axle housing.
Q: How do you inspect the rear axle lubricant level for the 8.6-inch axle?
A:
You can remove the rear axle fill, inspect the lubricant level, add lubricant if the level is low, and install the fill plug.