Notes: Maintains Rear Air Leveling;with Z55 Electronic Suspension;without 22 in Wheels;without Magnetic Ride Control Suspension;Converts Electronic Adjustable Suspension to Conventional Suspension;Box 2 of 2; Must Be Used w/90013C1; Unassembled monotube struts & air shocks
Max Year Covered: 2014
Min Year Covered: 2007
Most Popular Make / Model: Chevrolet Tahoe
Most Popular Year: 2007
Product Grade: Economy
Total Part VIO: 2147657
UPC: 048598225085
Part Description: 2008 Chevrolet Avalanche Front Coil Springs
More Info
Vehicle Fitment
2008 Chevrolet Avalanche | All Trims | All Engines
Part Description: 2008 Chevrolet Avalanche Front Spring
More Info
Vehicle Fitment
2008 Chevrolet Avalanche | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Coil Springs Repair
Q: What is the coil spring installation procedure?
A:
Install the coil spring and the upper insulator. Next, raise the rear axle and install the lower shock absorber retaining nut/bolt to the rear axle. Next, install the stabilizer shaft link to the frame and connect the ESC sensor.
By Bob
GM Specialist
02/03/2022
Q: What are the shock absorber and spring assembly service procedures?
A:
First, remove the front tire and wheel assembly then disconnect the outer rod from the steering knuckle. Tighten the shock absorber module bolts to 50 Nm.
By Omar
GM Specialist
24/02/2022
Q: What is the shock, shock component, and/or spring service procedure?
A:
Remove the shock module and tighten the front shock absorber to 50 Nm. For proper alignment during assembly, make sure one of the mount studs is aligned with the centerline of the shock absorber.
By Omar
GM Specialist
24/02/2022
FAQ for Other Repair Info
Q: How do I install the Rear Axle Lower Control Arm?
A:
Start with placing the Control Arm on the vehicle, next you will need to install the bolts and nuts that attach the lower control arm. Finally, remove the rear axle support and lower the vehicle.
Q: How do I install the shock absorber?
A:
Start with installing the Shock Absorber and then attaching it by installing the upper and lower nuts and bolts. Reconnect the electronic suspension control connector. Remove the support from the rear axle. remove safety stands and lower the vehicle.
Q: How do I remove the front brake caliper?
A:
Start with raising and supporting the vehicle, next you will need to remove the tire and wheel assembly, the brake pads, the brake pad retaining springs, the Brake Caliper mounting bolts, and the brake caliper bracket.