Notes: with AAM Axle; Independent Front Suspension; with 8.25in Ring Gear
UPC: 724956033898
Part Description: 2008 Chevrolet Avalanche Axle Shaft Pilot Needle Bearing
More Info
Vehicle Fitment
2008 Chevrolet Avalanche | All Trims | All Engines
FAQ for Axle Bearing Repair
Q: Can the same wheel hub seal be reused?
A:
No, it is recommended you replace the wheel hub seal with a new one anytime the assembly is removed from the axle housing.
By Bob
GM Specialist
07/03/2022
Q: How do I remove the Rear Axle Shaft Seal and/or Bearing?
A:
Start with raising the vehicle and removing the wheel and tire assembly. Then remove the rear axle housing cover and the axle shaft. Remove the axle shaft seal and the bearing from the axle housing.
By Bob
GM Specialist
05/03/2022
Q: What special tools will I be needing to service the Rear Axle Hub, Bearing, Cup, and/or Seal?
A:
You will be needing a Universal Driver Handle, Wheel Bearing Nut Wrench, Wheel Bearing Race Installer outer and inner, Hub Outer Bearing Race Installer, Differential Bearing, and Hub Seal Installer.
By Omar
GM Specialist
23/02/2022
Q: What special tools will I need to service the Rear Axle Shaft Seal and/or Bearing?
A:
You will need a Universal Driver Handle-3/4 in - 10, Axle Pinion Oil Seal Installer, Axle Shaft Bearing Installer, Slide Hammer, Rear Axle Seal, and Bearing Remover.
By Bob
GM Specialist
22/02/2022
Q: What will need to be removed to access the Differential Bearing and Hub Seal Installer?
A:
You will need to remove the tire and wheel assembly, the wheel speed sensor, the brake rotor assembly, and the rear axle shaft.
By Bob
GM Specialist
22/02/2022
FAQ for Other Repair Info
Q: What will need to be cleaned before installation?
A:
The inner and outer race assemblies, The CV Joint cage, and the chrome alloy balls.
Q: How do you inspect the rear axle lubricant level for the 8.6-inch axle?
A:
You can remove the rear axle fill, inspect the lubricant level, add lubricant if the level is low, and install the fill plug.
Q: How do you install the drive pinion bearings?
A:
You can install the pinion gear pilot bearing, the new collapsible space, the pinion, and the washer.