Part Description: 2008 Cadillac XLR Wiper Asm, Windshield-RH (Refill)
More Info
Vehicle Fitment
2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Wiper Blade Repair
Q: How to remove the Windshield Wiper Blade?
A:
You should pull up on the wiper blade release tang, slide the wiper blade out from the inside radius of the wiper arm, and remove the wiper blade from the wiper arm by guiding it out through the opening in the blade.
By Bob
GM Specialist
01/11/2022
Q: How to install the Windshield Wiper Blade?
A:
You should install the hook of the wiper arm through the opening in the wiper blade, position the wiper blade pivot into the inside radius of the wiper arm hook, and press the wiper blade pivot into the wiper arm hook until the pivot locks into the wiper arm.
By Bob
GM Specialist
01/11/2022
Q: How to clean the Blade Element?
A:
You should lift the blade off the windshield, clean the element with a cloth saturated in full-strength washer solvent, rinse the blade with water and lower the blade to the windshield.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Washer Pump?
A:
You should install the Washer Pump rubber grommet into the washer solvent container, install the left front lower wheelhouse splash shield and fasteners, and the left front wheel.
Q: How to remove the Washer Solvent Container Level Sensor?
A:
You should remove the left front wheel, the left front lower wheelhouse splash shield fasteners at the rear of the wheelhouse, the shield, and the washer solvent container level sensor.
Q: How to remove the Headlamp Washer Pump?
A:
You should remove the left front wheel and the left front lower wheelhouse splash shield fasteners from the rear of the wheelhouse.