< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
Cameras & Driver Safety
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Reverse Sensor
PartNumber: 88891836
Product Specifications- Notes: Reverse Sensing System
- Other Names: Distance Sensor, Reverse Sensor, Sensor
- Item Dimensions: 4.2 x 4.3 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88956561
- Part Description: 2008 Cadillac XLR Reverse Sensor
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$296.76 MSRP:$466.71You Save: $169.95 (37%)
FAQ for Parking Sensors Repair
Q: How to install the Rear Object Sensor Housing?
A:
You should remove the protective paper backing from the sensor housing, and install the rear object sensor and the rear fascia.
By Bob
GM Specialist
02/11/2022Q: How to remove the Rear Object Sensor Housing?
A:
You should remove the rear fascia, the rear object sensor, the sensor housing from the fascia, and all remaining adhesives.
By Bob
GM Specialist
02/11/2022Q: How to install the Rear Object Sensor?
A:
You should install the sensor retainer ring to the sensor, and the sensor to the sensor housing until the sensor is fully seated, connect the electrical connector to the sensor, and install the rear fascia.
By Bob
GM Specialist
02/11/2022Q: How to remove the Rear Object Sensor?
A:
You should remove the rear fascia, disconnect the electrical connector from the rear object sensor, and remove the rear object sensor from the sensor housing, and the rear object sensor retainer ring from the sensor.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the nuts to the rear object alarm detection module?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Object Alarm Module?
A:
You should remove the trim assembly from the rear compartment panel stowage, the nuts from the rear object alarm detection module, and the module.
By Bob
GM Specialist
01/11/2022Q: How to install the Object Alarm Module?
A:
You should install the nuts to the rear object alarm detection module, and the trim assembly to the rear compartment panel stowage.
By Bob
GM Specialist
01/11/2022Q: How to remove the Information Center Telltale Assembly?
A:
You should remove the bezel and the telltale from the rear window trim panel with a flat-bladed tool, and the bezel from the telltale, disconnect the electrical connector and remove the telltale.
By Bob
GM Specialist
01/11/2022Q: How to install the Information Center Telltale Assembly?
A:
You should connect the electrical connector to the telltale, install the bezel to the telltale, the bezel, and the telltale to the rear window trim panel.
By Bob
GM Specialist
01/11/2022See more FAQs (4)