< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
Intercoolers, Turbos & Superchargers
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Intercooler
PartNumber: 25775251
Product Specifications- Notes: 4.4 Liter
- Other Names: Intercooler
- Item Dimensions: 31.7 x 8.7 x 8.5 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10346011
- Part Description: 2008 Cadillac XLR Intercooler
Vehicle Fitment- 2008 Cadillac XLR | V | 8 Cyl 4.4 L GAS
FAQ for Intercooler Repair
Q: What is the recommended torque for the short-charge air cooler bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the charge air cooler coolant hose assembly nut?
A:
The recommended torque is 8 N.m (71 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Charge Air Cooler Radiator?
A:
You should install the charge air cooler radiator to the vehicle, the charge air cooler radiator retaining nuts, the charge air cooler coolant inlet hose to the charge air cooler radiator, and the charge air cooler coolant outlet hose to the charge air coolant radiator.
By Bob
GM Specialist
01/11/2022Q: How to inspect the Charge Air Cooling System Coolant Level?
A:
You should remove the manifold sight shield and the charge air coolant cap, verify that the coolant is visible near the top of the opening, and install the charge air coolant cap bolts and the manifold sight shield.
By Bob
GM Specialist
01/11/2022Q: How to install the Charge Air Cooler Housing?
A:
You should install the new charge air cooler housing interior O-ring gaskets, the new charge air cooler housing perimeter gasket, the charge air cooler housing, the long charge air cooler bolts, the short charge air cooler perimeter bolts, the charge air cooler cooling tubes, the charge air cooler rear manifold, the charge air cooler front manifold, the fuel rail, and the fuel fill cap.
By Bob
GM Specialist
01/11/2022Q: What should be noted in the inspection t of the Charge Air Cooling System Coolant Level?
A:
You should use a 50/50 mixture of DEX-COOL(R) antifreeze and clean drinkable water, and pour the coolant in very small amounts to avoid coolant spillage from the charge air coolant cap port or the funnel.
By Bob
GM Specialist
01/11/2022Q: What should be noted in the installation of the Charge Air Cooler Coolant Rear Manifold?
A:
You should make sure that the charge air cooler cooling tubes must be installed with the restrictor plates and notch facing the proper directions.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required in the draining and filling of the Charge Air Cooling System (Static Fill)?
A:
The tools required include J 26568 coolant and battery tester and J 38185 hose clamp pliers.
By Bob
GM Specialist
01/11/2022Q: How to install the Charge Air Bypass Regulator Solenoid Valve?
A:
You should install the bracket and bolt if previously removed, the bypass regulator solenoid valve to the bracket, and the engine sight shield.
By Bob
GM Specialist
01/11/2022Q: How to remove the Charge Air Cooler Housing?
A:
You should remove the fuel rail, the charge air cooler front manifold, the charge air cooler rear manifold, the charge air cooler cooling tubes, the long charge air cooler bolts, the short charge air cooler perimeter bolts, the charge air cooler housing, the charge air cooler housing perimeter gasket, and the charge air cooler housing interior O-ring gaskets.
By Bob
GM Specialist
01/11/2022See more FAQs (18)