< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Trunk Lid Switch
PartNumber: 25635324
Product Specifications- Notes: Trunk Lid Enable
- Item Dimensions: 3.2 x 2.2 x 2.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Trunk Lid Switch
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$17.36 MSRP:$27.10You Save: $9.74 (36%)
OEM (Genuine) 2008 Cadillac XLR Switch Asm-Door Lock *Dark Satn Nkl
PartNumber: 10317385
Product Specifications- Notes: Xlr; Right
- Location: Passenger Side
- Other Names: Lock Switch
- Item Dimensions: 2.0 x 1.9 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Switch Asm-Door Lock *Dark Satn Nkl
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac XLR Switch Asm-Door Lock *Dark Satn Nkl
PartNumber: 10315827Product Specifications- Notes: Xlr; Left
- Location: Driver Side
- Other Names: Lock Switch
- Item Dimensions: 2.2 x 1.8 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Switch Asm-Door Lock *Dark Satn Nkl
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Door Lock Switch Repair
Q: How to install the Door Lock Switch-Passenger Front?
A:
You should install the power door lock switch to the armrest switch plate applique, and the lock switch assembly into the pocket in the door trim panel, remove any protective tape, install the armrest to the door trim panel, the inner energy absorber to the door panel, the upper trim to the door, the retainers at the back of the door trim panel, and the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Door Latch Release Switch-Driver Side?
A:
You should remove the door trim panel, the inner energy absorber from the door panel, 4 retaining screws from the rear of the armrest, 1 retaining screw from the forward end of the armrest assembly, the armrest pull trim cover, the retaining screws from the trim cover applique, the applique from the armrest, and the door latch release switch from the armrest trim cover applique.
By Bob
GM Specialist
01/11/2022Q: How to install the Door Lock Switch-Driver Door?
A:
You should install the power door lock switch to the armrest switch plate applique, and the lock switch assembly into the pocket in the door trim panel, remove any protective tape, install the armrest to the door trim panel, the inner energy absorber to the door panel, the upper trim to the door, the retainers at the back of the door trim panel, and the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Door Lock Switch-Driver Door?
A:
You should remove the door trim panel, the retainer screws from the back of the upper trim panel, the upper trim from the door, the inner energy absorber from the door panel, 4 retaining screws from the rear of the armrest, 1 retaining screw from the forward end of the armrest assembly, the power door lock switch assembly from the pocket in the door trim panel, and the power door lock switch from the armrest switch plate applique.
By Bob
GM Specialist
01/11/2022Q: How to install the Door Latch Release Switch-Passenger Side?
A:
You should install the door latch release switch to the armrest trim cover applique, the applique to the armrest, the retaining screws to the trim cover applique, the trim cover to the armrest, the armrest to the door trim panel, the inner energy absorber to the door panel, and the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Side Door Handle Switch?
A:
You should position the touchpad onto the door, install the fasteners, and verify the operation of the electric touchpad door release.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fasteners?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the retainers at the back of the door trim panel?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the retaining screws to the trim cover applique?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Door Latch Release Switch-Driver Side?
A:
You should install the door latch release switch to the armrest trim cover applique, the applique to the armrest, the retaining screws to the trim cover applique, the trim cover to the armrest, the armrest to the door trim panel, the inner energy absorber to the door panel, and the door trim panel.
By Bob
GM Specialist
01/11/2022See more FAQs (8)