< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Cover, Differential Carrier (Left, W/ Rear Axle Bushing)
PartNumber: 19132905
Product Specifications- Notes: Xlr; Left; All
- Other Names: Carrier Cover
- Item Dimensions: 16.4 x 12.4 x 7.3 inches
- Item Weight: 6.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Cover, Differential Carrier (Left, W/ Rear Axle Bushing)
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac XLR Cover, Differential Carrier (Right)
PartNumber: 19132787Product Specifications- Notes: Xlr; Right; All
- Other Names: Carrier Cover
- Item Dimensions: 12.2 x 11.6 x 10.9 inches
- Item Weight: 8.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Cover, Differential Carrier (Right)
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Differential Cover Repair
Q: How to install the Differential Carrier Cover and Seal-Left Side?
A:
You should install a new O-ring seal to the differential cover, the differential cover to the differential, the dowel pin and the differential cover retaining bolts, the axle seal into the differential cover using J 46405, the LH muffler assembly, the LH wheel drive shaft and the LH rear tire and wheel assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Differential Carrier Cover and Seal-Right Side?
A:
You should install the selected shims and the bearing race to the new cove, a new O-ring to the differential cover, the differential cover, the dowel pin and the differential cover retaining bolts, the axle seal into the differential cover using J 46405, the right rear muffler and the right rear wheel drive shaft.
By Bob
GM Specialist
01/11/2022Q: How to remove the Differential Carrier Cover and Seal-Right Side?
A:
You should remove the right rear wheel drive shaft, the right rear muffler assembly, the right differential mount, the retaining bolts and push out the dowel pin, the differential cover, and the axle seal, and install the DT-47596 into the right cover.
By Bob
GM Specialist
01/11/2022Q: How to remove the Differential Carrier Cover and Seal-Left Side?
A:
You should remove the LH rear tire and wheel assembly, the LH wheel drive shaft, the LH muffler assembly, the bolts retaining the differential cover and push out the dowel pin, the differential cover from the differential, the O-ring seal and the axle seal from the differential side cover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the differential cover retaining bolts?
A:
The recommended torque is 28 N.m (20 lb-ft).
By Bob
GM Specialist
01/11/2022