< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Outlet Radiator Coolant Hose Assembly
PartNumber: 10346010
Product Specifications- Notes: Xlr; 4.6 Liter; 4.4 Liter
- Other Names: Lower Hose
- Item Dimensions: 17.2 x 6.8 x 3.6 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15146127
- Part Description: 2008 Cadillac XLR Outlet Radiator Coolant Hose Assembly
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac XLR Upper Radiator Hose Assembly
PartNumber: 15146129
Product Specifications- Notes: XLR; 4.6L; 4.6 Liter
- Other Names: Upper Hose
- Item Dimensions: 32.7 x 6.5 x 5.6 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10441363
- Part Description: 2008 Cadillac XLR Upper Radiator Hose Assembly
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum | 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac XLR Radiator Inlet Hose (Upper)
PartNumber: 19129885
Product Specifications- Notes: XLR; 4.4L; 4.4 Liter
- Other Names: Upper Hose
- Item Dimensions: 33.1 x 6.5 x 5.8 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Radiator Inlet Hose (Upper)
Vehicle Fitment- 2008 Cadillac XLR | V | 8 Cyl 4.4 L GAS
FAQ for Coolant Hose Repair
Q: How to install the Generator Cooling Pipe/Hose Quick Connect Fitting?
A:
You should install the generator cooling inlet pipe into the generator cooling inlet pipe fitting, and give the cooler pipe a gentle pull to ensure the cooler line is properly installed.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the generator cooling hose assembly to the generator bolt?
A:
The recommended torque is 27 N.m (20 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Generator Cooling Hose Assembly?
A:
You should remove the accessory drive belt tensioner, the generator cooling hose assembly to the generator bolt, the generator cooling hose assembly from the vehicle, and the seal washers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the generator cooling inlet hose fitting?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Generator Cooling Pipe/Hose Quick Connect Fitting?
A:
You should install the J 41623-B onto the generator cooling inlet pipe, connect the J 41623-B onto the generator cooling inlet pipe fitting, rotate the J 41623-B until the retainer clip rises above the fitting retainer seat, pull back on the generator cooling inlet pipe to disengage the pipe from the generator cooling inlet pipe fitting and remove the J 41623-B from the generator cooling inlet pipe.
By Bob
GM Specialist
01/11/2022Q: How to install the Generator Cooling Inlet Hose Fitting?
A:
You should install the new seal washer onto the generator cooling inlet hose fitting, and the generator cooling inlet hose fitting to the vehicle, connect the generator cooling hose to the water pump and install the accessory drive belt tensioner.
By Bob
GM Specialist
01/11/2022Q: How to remove the Generator Cooling Inlet Hose Fitting?
A:
You should remove the accessory drive belt tensioner, disconnect the generator cooling hose from the water pump, and remove the generator cooling inlet hose fitting from the vehicle, and the seal washer.
By Bob
GM Specialist
01/11/2022Q: How to install the Generator Cooling Hose Assembly?
A:
You should install the generator cooling hose assembly to the vehicle, the generator cooling hose assembly to the generator bolt, and the accessory drive belt tensioner.
By Bob
GM Specialist
01/11/2022See more FAQs (3)