< Back ×
My Vehicle Change Vehicle
2008 Cadillac XLR
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2008 Cadillac XLR Fan Switch
PartNumber: 15326386
Product Specifications- Notes: Xlr
- Item Dimensions: 2.9 x 1.2 x 0.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25036979, 12146312
- Part Description: 2008 Cadillac XLR Fan Switch
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$27.05 MSRP:$51.06You Save: $24.01 (48%)
OEM (Genuine) 2008 Cadillac XLR Sensor
PartNumber: 15865791
Product Specifications- Notes: 4.4 Liter; Xlr; 4.4l
- Item Dimensions: 4.4 x 4.1 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12576410
- Part Description: 2008 Cadillac XLR Sensor
Vehicle Fitment- 2008 Cadillac XLR | V | 8 Cyl 4.4 L GAS
$77.66 MSRP:$146.54You Save: $68.88 (48%)
OEM (Genuine) 2008 Cadillac XLR Manifold Absolute Pressure Sensor Sensor
PartNumber: 25036751
Product Specifications- Notes: 4.4 Liter; Xlr
- Item Dimensions: 2.9 x 1.2 x 0.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25037225
- Part Description: 2008 Cadillac XLR Manifold Absolute Pressure Sensor Sensor
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$46.08 MSRP:$76.29You Save: $30.21 (40%)
OEM (Genuine) 2008 Cadillac XLR Air Temperature Sensor
PartNumber: 10248414
Product Specifications- Notes: Xlr
- Item Dimensions: 3.1 x 2.4 x 1.4 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac XLR Air Temperature Sensor
Vehicle Fitment- 2008 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$11.14 MSRP:$20.13You Save: $8.99 (45%)
FAQ for Air Temperature Sensor Repair
Q: What is the recommended torque for the IAT sensor 2?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Air Temperature Sensor-Lower Right Side?
A:
You should install the lower RH DTM sensor to the HVAC module, connect the lower RH DTM sensor electrical connector, and install the HVAC module.
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Temperature Sensor-Lower Right Side?
A:
You should remove the heating, ventilation, and air conditioning (HVAC) module, disconnect the lower RH discharge temperature management (DTM) sensor electrical connector and remove the lower RH DTM sensor from the HVAC module.
By Bob
GM Specialist
01/11/2022Q: How to install the Air Temperature Sensor-Upper Left Side?
A:
You should install the upper left DTM sensor to the air distribution duct, connect the upper left DTM sensor electrical connector and install the I/P cluster.
By Bob
GM Specialist
01/11/2022Q: How to install the Air Temperature Sensor-Lower Left Side?
A:
You should install the lower LH DTM sensor to the HVAC module, connect the lower LH DTM sensor electrical connector, and install the HVAC module.
By Bob
GM Specialist
01/11/2022Q: How to install the Ambient Air Temperature Sensor?
A:
You should install the ambient air temperature sensor to the lower radiator support, and the push-in retainer to secure the ambient air temperature sensor to the radiator support.
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Temperature Sensor-Upper Left Side?
A:
You should remove the I/P cluster, disconnect the upper left DTM sensor electrical connector and remove the upper left DTM sensor from the air distribution duct.
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Temperature Sensor Replacement-Upper Right Side?
A:
You should remove the instrument panel (I/P) trim pad, disconnect the upper right discharge temperature management (DTM) sensor electrical connector, and remove the upper right DTM sensor from the air distribution duct.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the driver information center retaining screw?
A:
The recommended torque is 1.9 N.m (17 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Air Temperature Sensor-Lower Left Side?
A:
You should remove the heating, ventilation, and air conditioning (HVAC) module, disconnect the lower LH discharge temperature management (DTM) sensor electrical connector and remove the lower LH DTM sensor from the HVAC module.
By Bob
GM Specialist
01/11/2022See more FAQs (14)